Quick Question!

Have you ever purchased from PartSelect.com before?

11747831-1-S-Whirlpool-WPD7605108Q-Freezer Door Gasket
11747831-1-S-Whirlpool-WPD7605108Q-Freezer Door Gasket 11747831-2-S-Whirlpool-WPD7605108Q-Freezer Door Gasket http://www.partselect.com/Schematics/Maytag/13648.gif

Freezer Door Gasket

PartSelect Number PS11747831

This white door gasket is used to seal the freezer door when closed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door Sweating.

Compare At

$110.44

You Save

$18.41

Your Price

$92.03
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 3 reviews What's this?
1-3 of 3
 

20 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Socket set
Customer: Dan from Easton, MA

Had to replace the fridge and freezer door gaskets

loosened the little bolts around the door that held the old gaskets in place. Removed the old gaskets, installed the new ones and tighten the bolts. Very important to let the gaskets settle after you take them out of the box because they are all crumpled up and the door doesn't seal right. Even after I let them settle and used a hair dyer to straighten them out, they were still a little crumpled when I put them on and the door didn't seal right. I just used the hair drier some more on the gaskets while they were on the door and they popped right back into shape and the doors sealed perfectly. Fridge and freezer work much better now. No more condensation forming around the fridge and the food stays nice and dry now.

For about $100 and 1.5 hours of work, I have a great working fridge and freezer and saved about $500 for a new unit!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Jason from Bridgeport, TX

Need new gasketts for both doors

had to take the complete door panel off and was a little difficult but it all worked out in the end and they both work great now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
  • Freezer Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Socket set
Customer: Mickey from Molino, FL

Gaskets was old, hard and out of shape

To begin with just I am like the gaskets, I'm a 62 yr. old woman and I too am old and out of shape. Main reason it took so long. I used the drill motor to remove the screws located under edge of gaskets. Pulled the door panel off, removed old gasket from the freezer part first. Had to remove the freezer door in order to replace panel. The door was a bit heavy but I made it. Then I removed the refrigerator panel the same way. Removed old gasket and replaced it with the new one. (It still has a few kinks that I couldn't remove) I couldn't remove the door , so I put 2 screws in the top of the door panel to hold it in place and worked my way around the panel. Screws on the bottom were the hardest (Too low for old people). Both doors are working fine now and I don't have to purchase a new refrigerator/freezer. God is Great

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3