Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/11089.gif
See part 26 in the diagram
http://www.partselect.com/Schematics/Maytag/11089.gif

Bimetal Defrost Thermostat

PartSelect Number PS11747826

This refrigerator defrost thermostat will cut out at 48 degrees Fahrenheit and kick back in when the temperature drops to 25 degrees Fahrenheit. Use it for your Amana brand refrigerator.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$41.16

You Save

$6.86

Your Price

$34.30
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.5 / 5.0, 1 reviews What's this?
1-1 of 1
 

2 of 6 people found this instruction helpful

Parts Used:
  • Bimetal Defrost Thermostat
Level of Difficulty: Difficult
Time to do repair: More than 2 hours
Tools: Pliers, Screw drivers, Socket set
Customer: Anders from Eagan, MN

Water started drip from freezer door.

Freezer full, so first thought door had been left slightly adjar. Verified the compressor was runing. Left to hopefully cool down. Did not happen. Searching for cause after covers were removed identified that fan in freezer was not working and ice had built up . While troubleshooting, the freezer went through a defrost cycle. Juryrigged the fan to run continuosly and concluded the defrost thermostat must be the problem.
Installed new thermostate when recieved. No change! Deeper search then found crack in the defroster coil, which must have worked off and on but finaly failed completely.

Bought new refidgerator, as this was just one more problem with this older refridgirator. Also ordered new defroster coil to hopefully fix up the old refridgerator as a garage spare.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1