Quick Question!

Have you ever purchased from PartSelect.com before?

11747816-1-S-Whirlpool-WPB5705307-Plastic Tubing
11747816-1-S-Whirlpool-WPB5705307-Plastic Tubing 11747816-2-S-Whirlpool-WPB5705307-Plastic Tubing http://www.partselect.com/Schematics/Maytag/50671.gif

Plastic Tubing

PartSelect Number PS11747816

1/4" Plastic tubing, 8 1/2 feet long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.

Compare At

$6.00

You Save

$1.00

Your Price

$5.00
Order within the next 1 hr and 30 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

46 of 75 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Michael from Tucson, AZ

Leak from back of refrigerator where water line enters ice compartment

replaced old water fill tube for ice maker because it would clog with frozen water which would result in leaking from back of refrigerator where water line for ice maker entered refrigerator. Parts arrived faster than anticipated from parts select. New part was made differently (up-graded) so that water would not freeze. removed old fill tube and replaced with new. replaced water tubing and secured. leak is no longer present and I do not anticipate further issues from this problem. Thanks Parts Select

Help other customers find the most helpful instructions.

Were these instructions helpful?   

33 of 56 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Socket set
Customer: harry from murfreesboro, TN

Water leaking from bottom of fridge

The line going from the ice maker fill valve ruptured and leaked water on the floor. The outlet fitting for the ice maker water inside the freezer was plugged with ice which caused the pressure to build up in the line and rupture it. The discharge tube inside was full of ice because the ice maker fill valve was old and was leaking ever so slightly. This allowed water to exit into the discharge tube gradually and build up ice to the point of blocking the discharge tube.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 20 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Harry from Seminole, FL

Fridge gasket leaking; freezer tray broken tab; icemaker tube leaking

Fridge Gasket - heated the gasket with hairdrier to reform shape from shipping. Tried loostening nuts all around, but when installing the top part first, had to remove the nuts in order to have sufficient space to install gasket. Then tightened top nuts, and proceeded to install side parts, removing the nuts as I went down. Once about half down, was able to finish installation without removing any more nuts - loosening was enough.
Freezer tray - just slide it in. The only concern was the part deminsions were not correct. They showed the tray to be about 15", while my old tray was about 12". But when the tray arrived I was thankful that the new one matched the old one - 12". The diragram needs to be corrected.
Icemaker tube - no problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3