![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
Light Bulb - 120v 25w WPA3167501
Fits your DM15K-7BR-N!
★★★★★
★★★★★
Rated by 7 customers
Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
Fits your DM15K-7BR-N!
PartSelect Number PS11747808
Manufacturer Part Number WPA3167501
Manufactured by
Whirlpool
Product Description
Light Bulb - 120v 25w Specifications
This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. This part is sold individually. This is a common wear part, so it is recommended order a spare and to check other appliance light bulbs in your home. This is an authentic OEM part that is sourced directly from the genuine manufacturer. Be careful when handling the light bulb; use a pair of needle nose pliers to remove the base if the glass bulb is broken.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Microwave, Microwave Oven Combo, Washer.
This part works with the following products:
Amana, Magic Chef, Norge, Kenmore.
Part# WPA3167501 replaces these:
0068901, 0087273, 0090395, 01060008, 01060018, 01060024, 01060028, 106-0018, 106-0024, 14202454, 2-2479, 202479, 21608, 25T8DC, 30283-A, 3387683, 3392120, 5-20224, 520224, 53-0177
...
Show more
, 53-0570, 661555, 7-1247, 7-90170, 701247, 790170, A0278301, A0352501, A31675-1, A31675-4, A3167501, A3167504, C0436401, R0167095, WX12X1560, Y0068901, Y0087273, Y0090395, Y01060008, Y01060018, Y01060024, Y01060028, Y520224, Y701247, Y90395
Show less
Customer Reviews
Average Rating:
3 Reviews
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John L - January 23, 2022
Verified Purchase
Shipping issue.
First bulb was destroyed in shipping. I notified you and a second bulb was received quickly that was very well wrapped and I perfect condition. Took about five minutes to install it and everything is working perfectly. Great response to the shipping issue.
★★★★★
★★★★★
Mary M - May 11, 2019
Verified Purchase
Dryer light on old dryer
Could not find the type of bulb needed on our old but good dryer. They don’t build like this one anymore so it Was hard to find this bulb. Sure do appreciate Parts Select who did have bulb so now dryer is back in business. Thanks Parts Select!
★★★★★
★★★★★
Pat G - November 8, 2018
Verified Purchase
So glad to find this part
The part came fast and was well packed. It works great.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 7 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light bulb went out in mictowave
Screwed the new “$40” dollar light bulb back into the recessed socket. The new bulb is much smaller that the original bulb and much harder to get fingers into small area where the bulb went. After several try’s, I got it in.
-
Linda from BURSON, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Noise
Its good to clean all the lint out the the dryer and vents on a yearly bases as to many years of lint build up can catch on fire and make a mess . Replacing the glides was easy . Make sure you clean all the old glue , so the pads stay in place as there need to compensate for minor frame to drum differences .
Other Parts Used:
-
Mark from Howard Lake, MN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer made a loud noise and vibrated badly
First I made sure the unit was unplugged. I popped the top of the unit with a slotted screw driver, lifted the top up and rested it against the wall behind the dryer. I removed the two screws - one on each side in front on top of the dryer cabinet. Then I tipped back the front panel of the dryer slightly with the door of the dryer close
... Read more
d. I unclipped the door switch with a slotted screw driver and then lifted the entire front panel including the door off of the the two floor clips on bottom. I set the front panel aside. Next I lifted the large drum slightly to dislodge the rollers in back and slid the drum back slowly while sliding the thin belt back on the drum until the drum was out of the unit and the belt was detached and loose. Then I cleaned the unit thoroughly, vacuumed all lint and dirt and wiped down the outside of the large drum with mineral spirits to make sure it was totally clean and smooth. Then I removed the two rollers and the roller shafts at the back of the unit following the directions enclosed. My slip-ring pliers came in handy to remove the retaining rings on the roller shafts. I replaced the rollers and roller shafts and the supplied washers and spacers as per the instructions. I sprayed a little WD-40 on the surface of the rollers and it stopped all squeaking and vibration of the drum. Next I replaced the front drum pads and runners as per the instructions. I then slid the drum back in place taking care to slide the new belt back around the drum in the same position as the old belt. Now came the difficult part - laying on the floor and reaching under the drum I positioned the belt around the motor shaft and tension pulley. This must be done by "feel" and must be done correctly!! Follow the instructions on the positioning of the belt very carefully and make sure it is in the correct position on the drum, motor shaft, and tension pulley! Next, get up and rock the drum up and down slightly to make sure it has engaged the two rear rollers properly. Rotate the drum manually one or two turns to make sure the belt is in the correct position. Then replace the front door panel by dropping it onto the two clips at the base of the unit and taking care to replace the door switch in reverse order of taking it out. Then replace the two screws at the top front on each side of the unit to secure the front panel. Lower the top of the unit back in place, plug in the dryer, turn it on and enjoy the lack of noise you have created.
Read less
Other Parts Used:
-
Thomas from Oneonta, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
65 of 75 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out lightbulb for over 20 years
Unscrewed back plate, and replaced bulb
-
Kathtleen from Bristol, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not run.
First you need to raise the top in order to get to the parts. Then the door is removed, I did this in order to thouroughly clean the lint build up in the duct work. Then the high limit thermostat is removed in the back top part of the dryer, just above the heater. Then the heating element is removed by removing one long screw that holds t
... Read more
he heater and the fused thermostat. Once all these parts are removed and the wires disconnected you simply reverse the process with the new parts. Put it all back together and everything works fine. Part Select.com also was helpful in diagnosing the cause of the problem. Thanks.
Read less
Other Parts Used:
-
James from Owings, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave oven bulb had burned out
My Dearest One removed the screws that held the part that covers the bulb; removed the old bulb, put in the new bulb and replaced the cover.
The whole operation took less than 5 mins.
Thank you.
The whole operation took less than 5 mins.
Thank you.
-
Deidre from Brownsville, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Bulb
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE!
-
Terri from Kingsland, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
![Produce Preserver Filter – Part Number: W10346771A](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/3503014-1-N-Whirlpool-W10346771A-Produce-Preserver-Filter.jpg)
![Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/1960673-1-N-Whirlpool-W10135699-Affresh-Washing-Machine-Cleaner-3-pack.jpg)
![Affresh Dishwasher Cleaner Tablets - 6 – Part Number: W10549851](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12345667-1-N-Whirlpool-W10549851-Affresh-Dishwasher-Cleaner-Tablets-6.jpg)
![Affresh Cleaner – Part Number: W10282479](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/2367638-1-N-Whirlpool-W10282479-Affresh-Cleaner.jpg)
![Cooktop Cleaner – Part Number: W10355051](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/3492527-1-N-Whirlpool-W10355051-Cooktop-Cleaner.jpg)
![Affresh Ice Machine Cleaner – Part Number: W11179302](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12583750-1-N-Whirlpool-W11179302-Affresh-Ice-Machine-Cleaner.jpg)
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747808
Manufacturer Part Number: WPA3167501
Manufacturer Part Number: WPA3167501
Brand
Model Number
Description
Back to Top
![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
Light Bulb - 120v 25w
$
53.91
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.