Quick Question!

Have you ever purchased from PartSelect.com before?

11747771-1-S-Whirlpool-WP99003337-SEAL- DOOR
11747771-1-S-Whirlpool-WP99003337-SEAL- DOOR 11747771-2-S-Whirlpool-WP99003337-SEAL- DOOR 11747771-3-S-Whirlpool-WP99003337-SEAL- DOOR http://www.partselect.com/Schematics/Maytag/55864.gif

SEAL- DOOR

PartSelect Number PS11747771

This dishwasher gasket, also known as a door seal, is used to provide a waterproof seal between the tub and the external edge of the door. If your dishwasher is leaking and you are getting water on the floor, changing the gasket can be the solution to your problem. For this repair, open the dishwasher door and pull out the lower dishrack for easier access. Locate the gasket at the bottom of the door and using a small head screwdriver, pull it out. Holding a piece of the gasket, you can pull the gasket away from the door easily. Remember there are cut-outs on the gasket for the corners, so place the new one accordingly and push them into place.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.

Compare At

$79.91

You Save

$13.32

Your Price

$66.59
Order within the next 1 hr and 54 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1
 

5 of 69 people found this instruction helpful

Parts Used:
  • SEAL- DOOR
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Richard from Hoffman Estates, IL

Igniter was broken

I read the notes from the other parts select customers and followed their directions. #1 remove the front of the dryer(2 screws less than 5 minutes)#2 unplug and detach the old igniter ( disconnect the plug, remove 1 screw with a 1/4"socket 5, minutes ) Vaccuum out the accumulated lint and dirt. ( not all that much 5 minutes ) #3 attach new igniter and plug it in (2 minutes) #4 turn on the dryer to make sure I have solved the problem ( I did ) #5 re install the front ( under 5 minutes )

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1