Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747755
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Tghe old one snaps off and the new one snaps right in .
Help other customers find the most helpful instructions.
Were these instructions helpful?
This was very easy to fix, just pop out the old one and install the new one. I saved $60-$75 on a repairman coming out to fix the thing in 5 minutes. Truly, I received the part from PartSelect in two days after placing the on-line order. We were up and running in between loads.
The upper arm was held in by a torx screw. The shoulder on the screw held the arm in place. Once removed I simply swapped parts and installed screw. The lower arm was held on by a plastic nut with knurled edges that you can remove by hand. The arm simply lifted off and I swapped arms again. The rollers are held on by a curled plastic lock that grips the wire basket.
Take out the old parts and clean all the ones to be reused by power washing with garden hose and/or compressor blasting. Put it all back together. BE VERY CAREFUL NOT TO PUNCTURE THE ACCUMULATOR FILTER! THE TORX SCREWS ARE RIGHT NEXT TO THE FILTER SO IF YOU SLIP AND DROP THE TOOL, THE FILTER WILL BE TOAST!THE DISHWASHER WORKS PERFECT NOW!
Removed the old broken wheel and popped in the new one. The best part of the entire problem was searching this website and finding the part quickly. Granted the shipping was almost double the price of the part, but still under $15. Searching and delivery of the part was fantastic.
The repair was simple. I did a Google search for the part online. PartSelect.com was the 1st site to appear. The link brought me right to the part I was looking for. I order the part (2 just so I would have one down the road in case this happens again) and the next day it was on its way. I simple popped of the old part and installed the new part... works like it is supposed to now. Thanks for the help PartSelect!
Ordered the part easily using model number and schematic on web site. Part came in two days. Unfortunately, they had the right part number but the wrong part was pulled and sent to me. I called and they resolved the issue over the phone and sent me the right part in two days. Part snapped right on in 5 seconds and I was back washing my dishes that evening.
The fold away pivots assebly is held in place by spring energy from the rack it is clipped into. It kept coming unclipped so I taped one in place to hold it to the rack and then positioned the other clip. Glad I ordered 2 new clips because the surviviing original clip broke easily. I'll never fold it away again.The wheel assembly was the reverse of removal and took a matter of seconds.
Very simple! First, free the wheel from the rail - should come right out if the wheel is broken. Then click the wheel base off the small shelf rod by rotating the wheel bse. Then, click the rail end cap off the rail by pressing it through the small square hole in the flat side of the rail. Insert the wheel into the rail, then click the wheel base back onto the shelf rail rod where you took the old one off. Click the rail end cap back on, and you're done!
Very easy to replace the roller. First I removed the stop on the top slide. Then I unsnapped the old roller. The new roller just snapped right in place. Then I put the drawer slide back on.... Took less than 5 minutes.
Replacement parts were an exact match so overall it was pretty simple. At the front end of the rack guide rail there is a removable stop. After removing the stop the old guide wheels can be removed from their "axles" (actually a part of the wire rack is bent at 90 deg to act as an axle), and simply moved forward and out of the guide rail. Took a few minutes to clean the guide rail, then installed the new guide wheels and pressed the removable stop back into place. Works like new.
I uncliped the "stop" at end of wheel track and slid out the old defective wheel, replaced with the new wheel, which you guys sent to me in two (!)days, and simply slid the new wheel into the track and cliped it onto the rack. Done!Saved around $100 repairing it myself!
first, i removed the stop part on the slide tray for the broken dishwasher wheel. then i changed out the wheel and replaced the stop part.i just slide the refrigerator bin into the refrigerator.very good service.quick shipment.none of my parts came with instructions but they didn't need to.
On a Saturday I ordered the wheels from Parts Select ( with a most helpful young lady, and on Tuesday, the parts arrivedat my residence.Before I found Parts Select, I had gone to TWO local appliance stores, and they were "unable" to find in their computer(s), and parts book(s), the replacement wheels.When I went to the Parts Select website, within five minutesI found excellent graphics for the exact wheels.Later I called one one appliance store, and gave him the Parts Select website, so he too could offer better parts selection to his customers.
ordered new roller and installed it.easy to order, friendly and helpful supplier, part came quickly via Fed Ex. No problem.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.