Quick Question!

Have you ever purchased from PartSelect.com before?

11747726-1-S-Whirlpool-WP99002836-Latch Handle
11747726-1-S-Whirlpool-WP99002836-Latch Handle 11747726-2-S-Whirlpool-WP99002836-Latch Handle http://www.partselect.com/Schematics/Maytag/53051.gif

Latch Handle

PartSelect Number PS11747726

This black latch handle is four and a half inches long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failure.
  • Will Not Start.

Compare At

$42.88

You Save

$7.15

Your Price

$35.73
Order within the next 20 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 22 reviews What's this?
16-22 of 22
 

0 of 1 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Zebru-haha from Sanford, NC

Latch broke, door was difficult to open

Remove Stainless steel inner panel, removal of 8 small torax head screws. Pull back inner panel to acccess handle assembly, then repace handle. The handle snaps into place with ease.

NOTE: TURN OFF POWER, there is a 110 volt terminal lug that is part of the handle assembly, you will get shocked if you fail to disconnect power.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ken from Opelika, AL

Broken handle

Removed inside panel with torx screwdriver maybe 8 screws. Pop new handle in from front side of switch only. Replace panel and start dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools:
Customer: ray from marietta, GA

Latch broke

removed inner panel of door
removed old latch
replaced with new latch
replaced inner panel

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Blair from Germantown, TN

Latch handle broken

First removed around 5 screws.
Then took inside door panel off.
Pulled out the piece that housed the door latch.
Replaced part, and put the door panel back on and tightened screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Tom from Cottonwood, CA

Plastic handle broke

I ordered only the plastic handle at 1st (wrong); I re-ordered it as electrical and found the whole piece needed replaced, the plastic handle was not available.
When I got it, I already had everything out and ready; it took approx. 10 minutes to put everything back and running. Very Easy!!!
Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Amy from Subiaco, AR

Latch broke

Took the inside door panel off by taking out the screws. Removed the broken latch, replaced it with the new. Replaced the door panel. Saved ourselves a service call. My husband is handy and can fix most anything.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Latch Handle
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Wrench set
Customer: John from Freehold, NJ

Handle was broken

Although there were no directions, I was able to figure out that you needed to take out all of the screws that hold the front panel on. Once I opened the front panel, the old handle fell out, so I wasn't sure how the new handle went in. In a couple of minutes, I figured it out and it is now fixed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-22 of 22