Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747723
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I had to remove the 8 screws around the interior portion of the door using a star driver. Once those screws were removed, the front door separated quite easily. I lifted the inside portion of the door to the "closed" position and used a small screw driver to hold it in place. I then removed the 3 screws using a nutdriver to remove the control assembly. I did remove the assembly without detaching any of the electrical connections. Then, place the new assembly in place (but not screwing it in yet), I moved the electrical connections one at a time. After that, I secured the control assembly, and reassembled the door panel. Everything went very smoothly.
Help other customers find the most helpful instructions.
Were these instructions helpful?
removed old one left wires attached until i took them off and replaced with new board one at a time. repair was easy. repair company wanted 300.00 to do what i did for the cost of part 149.00. it took more time to remove the screws in the door then it did to install the control board.
Removed the inside door cover. Removed the printed circuit boards. Put in the new boards. Replaced the inside door cover.
First I removed the screws that held the door together. I then unplugged all the wires from the back and removed the screws holding the LED panel in and unsnapped it from the clips. Just reverse the process putting the new one in. Worked great.
I unscrewed the 8 star head screws on the inner door panel and the 2 screws on the outer edge of the door, then the 2 screws on the door handle and it all opened up to the control board. Next I unscrewed the 2 screws holding the board and removed it, then disconnected the wire plugs to replace the board. At this point it was just a matter of reversing the sequence events.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.