Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control panel on 6 year old dishwasher failed.
Appliance dealer informed us the part was no longer available. Doubting his word I looked it up on the Internet and found Part Select's great website. Located the part, ordered it and it arrived in an anamazing three days. With the help of two screwdrivers my 74 year-old husband replaced the part in about 45 minutes. He just studied t
... Read morehe wiring first and then reattached the new part. No more dishpan hands. Great experience. Mary Jo
Read less
Mary Jo from Greencastle, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
12 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pushbutton panel stuck in "Lock" mode.
First I switched off the "Dishwasher" electrical breaker. I then removed the 7 screws holding the door panel together and lifted the inside panel, exposing the control assembly. I took a digital photo to document the wiring connections then pulled away the two clear plastic protective sheets and unscrewed the control assembly (two screws)
... Read more then disconnected all wiring. To make access easier I also removed the door latch assembly held by one screw. I removed the control assembly and reversed the process to install the new part. Voilà! It worked!
Read less
Ray from Olathe, KS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
19 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sharon
January 22, 2018
No lights no action. No response on control panel. Could it possibly be the door switch assembly. Machine is in great condition but over 15 years old. Wasn't used much for many years don't think it's worth replacing whole circuit board for over $300.00?
For model number Mdb7100awb
Hi Sharon,
Thank you for your question. The switches fix this issue the majority of the time, but there some other parts that you will need to check. You will need to check, the door handle, the electronic control board, the float switch and the limit thermostat. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Robert
April 2, 2019
Front panel is unresponsive; 5 of the lights across the panel stay on. None of the buttons (switches) does anything!!
For model number MDB7100AWW
Hello Robert, thank you for inquiring. You may want to replace the LED Main Control Board part PS11747721. If the machine is not starting at all, you may also need to replace either the Door Switches and Holder Assembly part PS2099645, the Door Switch part PS11747659, or the Latch Handle part PS11747644. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
