Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747711
This fold away tine pivot is almost four inches long. It is blue in color and is made of plastic.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I snapped the new parts onto the old parts of the dish rack. Voila! All done.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed and replaced middle rack. Installed new upgraded roller clip on wheels. Installed new plastic dishrack tine pivots being careful not to break them.
Simple removed the paperclip I put in place last summer to hold the rack in place, snapped both new parts where they belonged, and WOW, it's like new. So easy. And the best part was that I had the replacement parts in less than 24 hours! Talk about fast service.
Looked on line for replacement parts and found this website along with drawings, videos and owners who had the same problems and followed their descriptions on how to fix the different items I had to deal with.
I had changed a rack adjuster several years ago but decided to take a look at your videos before starting the repair. I watched both videos and then did exactly as suggested. The repair went very quickly and was extremely easy.
It took a few minutes for me to reallize that I needed to look at the way/direction the tine clip was in the existing position. It is important to mesh the part into all the correct positons before trying to complete the repair into the final snap/placement of the tine/clip. A minute or two of looking and (really important) not trying to replace both front AND rear tines at the same time! They are mirror images of each other. If you change one at a time, you can use the other as a template!
It only took a couple of seconds to snap in the replacement dishrack tine pivot parts. I didn't know how easy it was to get replacement parts and lived with the problem for months. The parts were easy to figure out on the website and arrived in a couple of days. Problem solved.
Everything just snapped in to place.
I snapped the old broken one off and snapped the new on.
pulled broken piece off and snapped new one on.
This repair did not require tools, but the positioning of the rack supports that the tine pivot holds in place did need to be positioned such that the tine pivot held the supports correctly in place without wiggling. The easiest way to ensure this is done correctly is to look at the other installed tine pivots in the dishrack and ensure the supports have no freedom to move longitudinally after the tine pivot is in place. If the supports can move forward and back freely or will not stay vertical, remove the tine pivot and ensure it is repositioned so the support will not move longitudinally. Have fun!
Screwed new screw onto arm of lower rackSnapped tine pivots into place
now the dishes come out clean.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.