Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul V - November 18, 2023
Verified Purchase
Perfect fit
Perfect fit, easy install.
★★★★★
★★★★★
Gary L - April 24, 2022
Verified Purchase
Dishwasher repair
The drain hose was the exact part required
No surprises and the repair was easy
Gary
★★★★★
★★★★★
Bob D - May 15, 2021
Verified Purchase
Easy repair
Needed new drain hose to connect to new disposal. Can’t buy an adapter end so purchased new Maytag drain hose. Works as it should. Other drain hoses sold in housing supply stores state theirs fits most dishwashers. Would not fit mine
★★★★★
★★★★★
Mike L - August 1, 2018
Verified Purchase
Hose is Too Short!!
Maytag Authentic Part? The drain hose is about 12 to 18 inches shorter than the original drain hose. I had to switch the double sink tail pieces and the drain hose was still barely long enough to reach the new location of the tail piece dishwasher inlet. This resulted in a lot more work to install the hose. The description provided doesn't even state the length of the hose so you are buying it in the blind. All this fun for an exorbitant price of $65. I would have been better of buying a new dishwasher. Buyer beware on this one.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The original drain hose developed leak
Pulled dishwasher out far enough to get at the original hose. Disconnected and drained the hose. Connected new hose, zip tied the hose in place, pushed dishwasher back in place and re-anchored. Zippidy do...piece of cake. Perfect fit.
Sy from CABLE, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain line had split
disconnected unit (electrical, water, and waste) un mounted from countertop, removed from under countertop, unscrewed hose clamb, cut off wire tie. Attached new hose and wire tie (not included) reversed above steps. Done in about 15 minutes
William from Interlochen, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
13 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cat brought in a mouse that turned into a RAT!
Ist Repaired a hole in a rubber hose under the sink. 2nd Removed the 10 foot drainage hose with a regular screw driver (1 clamp at each end of the hose). 3rd Removed the insulation and replaced with the new after disinfecting the entire top and sides of the dishwasher with bleach. This eliminated all bad odor etc. only had to r
... Read moreemove 2 plastic brads, 1 on each side of the unit.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
April 12, 2023
How long is this hose? My dishwasher is installed a long distance from the drain, so I had better make sure this will fit before ordering.
For model number JDB1250AWS
Hello David, Thank you for your inquiry. We show this hose is approximately 10 feet long. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.