Quick Question!

Have you ever purchased from PartSelect.com before?

11747690-1-S-Whirlpool-WP99002628-Water Inlet Valve
11747690-1-S-Whirlpool-WP99002628-Water Inlet Valve 11747690-2-S-Whirlpool-WP99002628-Water Inlet Valve 11747690-3-S-Whirlpool-WP99002628-Water Inlet Valve http://www.partselect.com/Schematics/Maytag/54154.gif

Water Inlet Valve

PartSelect Number PS11747690

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not fill with water.
  • Leaking.

Compare At

$71.57

You Save

$11.93

Your Price

$59.64
Order within the next 10 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

5 of 6 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Kathleen from Medina, OH

We were not getting water in the dishwasher.

I followed the directions given on line. Unscrewed the panel on the lower front of the dishwasher. Located the water valve by the hoses going into it. Turned off the water and electricity. Took off hoses--one came off like a garden hose. The other was clamped on. Disconnected wires. Unscrewed the valve. Replaced with new one by screwing it in. Put hoses back on. Attached wires as before. Screwed on panel, and did a load of dishes. Worked like new. Thanks! Saved us from having to buy a new washer and/or paying a repairman to come in. Good thing because the pump on our well went a couple days later and had to buy a new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Justin from University Park, PA

Input water valve was cracked and leaking

Pulled out the dishwasher, disconnected the electrical, water, and waste lines.Then removed 2 screws that held the valve in place, and the supply line. Swapped out the new valve for the old one, replaced dishwasher, reinstalled the water, electrical, and waste line. Turned the water valve on, checked for leaks, and fired the old dishwasher up.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Wrench set
Customer: Paul from Floral Park, NY

No water in dishwasher during cycle.

Bought water valve and changed. Then bought float switch and BINGO.. I have water.. Total for parts $40. Total labor $0. Feeling you get telling your wife you fixed it..... PRICELESS..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3