Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747681
This lower dishrack assembly is grey in color and comes complete with attached wheels. This part does NOT include the tines or the clips. You must reuse original parts as the tines and clips are now no longer available.
*Please note, this rack is a substitute, and may differ in appearance from the original.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Just took it out of the box and slid it in.Only problem I encountered, and I think it was due to the age of the dishwasher, was the newunit was not as deep as teh original rack. This will require a new method of loading dishes. Also, the new basket doesn't really fit well in the new rack.Still cheaper than replacing a good cleaning dishwasher!
Help other customers find the most helpful instructions.
Were these instructions helpful?
I simply ordered new rack assembly for the upper and lower rack units. Removed the old racks and slid in the new ones. I gotta say, Part Select saved me $50 for these racks compared to everywhere else I looked and called.Thank you Part Select !!!
I just replaced them with new ones. Unfortunately the new dishwasher rack was not as sturdy as the original. Hence, when it is loaded the wheel assembly sags and the center portion goes lower. Therefore, while rolling it in and out it hits the center jets and requires that we pick it up as it rolls: acceptable inconvenience but not pleasing.I fear that with many people using it, eventually the plastic top or plastic extension of the center jet will break off.
Lifted out the old rack and set in the new one. The raised portion of the new rack was not high enough to clear the lower spray tower, so I adjusted the back wheel "axles" downward about 3/8" with pliers, which raised the rear of the rack enough to clear the tower.
I unscrewed the top of the spinner, no tools required, and then I removed the spinner by lifting it up. Under that was a plastic nut that required a pear of pliers to loosen it then removed it with my fingers. The spinner assembly then lifted up and the seal ring was there. I replaced the ring and put it all back together, took maybe 20 minutes. I then replaced the wire racks with two new ones and now I have a new dishwasher. “Piece of cake.”It has taken me longer to type this than do the repair.
I call your office and was asked what the problem was and told them and they gave me a video to watch , which I did watch and was able to install the top rack to my dishwasher. Once you follow the directions ,it was easy. Thank you all so much.
Ordered by telephone. Parts came very promptly. Just had to slide rack in and place utensil holder in Voila, done.
Removed the old basket and installed the new. Once I received the correct part.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.