Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/52889.gif
See part 11 in the diagram
http://www.partselect.com/Schematics/Maytag/52889.gif

Timer

PartSelect Number PS11747658

The purpose of a dishwasher timer is to control the unit's cycles by regulating the length of time that power is directed to each component.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$204.84

You Save

$34.14

Your Price

$170.70
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

3 of 3 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Harry from LOs Angeles, CA

Timer would stick; washer kept running

Tuned off electrical power to the dishwasher. Removed the screws on the cover inside the door. Unplugged the electrical connector to the timer. Removed screw that keeps timer in place. Replaced with new timer, replaced screw, plug and panel screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ronda from Indianola, IA

Timer would stick in middle of wash cycle

Took panel off and replaced part.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Mark from New York, NY

Wheels came off and melted and timer never worked

Snapped on new wheels
For timer, removed all torx screws on the inside of the door, removed dial, separated door panels, unplugged multiconnector, removed single nut and slid out old timer. replaced the timer and reversed process.
works better than it ever had.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3