Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747642
This wheel mounting strip is ten and a half inches long.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
We followed the video instructions for removing the guide rail stops. That allowed us to pull out the top rack. We then followed the video instructions for removing the old mounting strip, put the new wheels on the new strip, and put the new strip in place. Then we re-installed the top rack and put the guide rail stops back. We ordered new rails stops just in case the old ones were brittle and broke when we removed them, but we didn't have any difficulties. Total cost - just the parts. Much more convenient and less expensive than requesting a non-warranty service call, waiting for someone to show up, and then paying the price for the call and the marked-up parts.
Help other customers find the most helpful instructions.
Were these instructions helpful?
It was so easy! No tools needed, just pop out and replace exactly like you took it apart!
removed the rail stops and pulled the upper shelf out completely. pulled off mounting strip and removed wheels. put wheels on new strip and put back together
Unbelievable easy! Pulled out the rack, used a flat screwdriver to pry off the old rollers, installed them on the strip, put everything back in place--works like new! Can't believe I put up with the bent strip for a couple of years when it was such an easy fix!
took rack out by unsnapping things in front of rack - it took a few minutes to figure out how to replace the part - then I removed the rack then the wheel mount strip - removed the wheel from old wheel moun, replaced them on the new one reinstalled the shelf, replace part to hold shelf in place and that was it. Very easy no repairman!
Removed the broken strip, carefully took the wheels off, put the wheels on the new strip and put it back on. Easy peezy! I was nervous ordering from an unfamiliar site that didn't have paypal but found it to be FANTASTIC! Part came FedEx on a Saturday with basic shipping purchased. I will check here first for all appliance repair in the future.
Snapped into place after about 5 minutes of study. Easy!
replaced strip bar and wheel...saved the price of a complete upper rack
The most difficult part of the repair was to figure out how the two retaining clips at the end of the rack slides came out. Once those were removed, it was a simple matter of replacing the broken wheel mounting strip with the new one. A simple "place and clip-in repair process." As for the repair of the adjustable clip. A simple "snap-in-place"repair was all that was needed.
removed old rail replaced wheels and was good to go
Received the parts, installed, and now works fine. fFast service, great price.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.