Quick Question!

Have you ever purchased from PartSelect.com before?

11747613-1-S-Whirlpool-WP99001746-Pivoting Tine Latch Clip
11747613-1-S-Whirlpool-WP99001746-Pivoting Tine Latch Clip 11747613-2-S-Whirlpool-WP99001746-Pivoting Tine Latch Clip http://www.partselect.com/Schematics/Maytag/50010.gif

Pivoting Tine Latch Clip

PartSelect Number PS11747613

This gray pivoting tine clip is four inches long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$10.70

You Save

$1.78

Your Price

$8.92
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 7 reviews What's this?
1-7 of 7
 

4 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Margaret from New Ipswich, NH

The dishrack guide rali stop had come off one of the guide rails, so the wheel in the guide rail would often roll right past the end of the rail, causing the rack to pitch down. This was rather frightening with the rack full of glasses and other breakables.

At first I snapped the plastic piece together and then tried to put it in the guide rail. That's where the sharp knife came in handy, to pry the piece apart again and start over. It was easy to see how the piece was supposed to go into the end of the rail and snap in place; I just didn't look carefully before I had to backtrack! I haven't yet tried to put in the other pieces we ordered.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Susan from Suwanee, GA

End cap for roller guide and latch clip had been missing for a while and I had improvised with packing tape and wire. I wish I had known how easy it would be.

had to fiddle around just a bit to look at the others and see how these fit in. No tools were required - just snapped into place once I figured them out.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Roswell, GA

Dishwasher rack broken

I just had to line up the two rack holders and snapped on the latch to each rack as well as to the back of the sliding dish holder.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 7 people found this instruction helpful

Parts Used:
  • Pivoting Tine Latch Clip
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Henri from Bentonville, AR

Part of the tine latch had broken

First I watched the online instructional video, then removed the broken piece, (no tools required), snapped on the new piece for a total of maybe 5 min. Easy. Even though the postage was more than the actual part ordered, it was great & prompt delivery service and the website has enough information to make you confident you are ordering a part that is compatible with your appliance.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Whiting, NJ

Plastic fold away clips became worn and broken.

Replacement of the fold away clips is easy and simple. There are no tolls required to make the repair. Simply unsnap the old fold away clips from the dish basket and reinsert the new clips by snapping them in place as the originals were installed by the manufacturer. In only a few minutes, the tine latches are replaced and you are set to go with configuring the dish basket. As mentioned earlier, simple, fast and a snap to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Richard from Tampa, FL

Parts broken

installed new parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: John from Scottsdale, AZ

Could not get the tines to stand up.

Place in the clip and it worked well.Thanks,

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7