Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747612
The upper spray arm helps distribute water from the top of the dishwasher tub.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
received new sprayer arm, within 5 minutes I had the old one replaced...works great.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Put the spray arm in and pushed it on.
I looked on your website, thanks to my daughter-in-law, and found not only the pieces but notes from others who had solved their similar problems at little cost and no time. So I ordered the parts, they came in a couple of days and in a very few minutes the washer was working again. And the pieces are staying on. Thanks for the parts and especially for the info and encouraging notes from other. By the way, I'm 75 and figured since a 71 year old woman did her machine I should be able to do mine. And I did. Thanks!!!
Dishwasher water arm on the top started falling off. So went online and looked up the make and model. Found out that it could be two parts causing the problem, shopped for them online and found them for less than $4.00 each ordered both not knowing which I needed (shipping was $7.99). Got them in and replaced them myself. No tools at all needed, dishwasher fixed for $15.00 in about 5 minutes....yeah me!!! PS I'm a 61 year old woman and proud of my accomplishment.
Unscrewed old plastic nut. Attached (snapped) new sprayer arm to new nut & screwed it on. Repairs just don't get much easier than this!
I just unscrewed the old nut and screwed in the new one and popped in the spray arm. It actually took me longer to type this than to make the repair. It was awesome!
I ordered the Upper spray arm nut along with the Upper spray arm assembly. Removed the old nut by hand, screwed on the new nut and snapped in the new spray arm. The nut was worn to the point that the arm wouldn't stay on. If you have to replace one, replace them both. The dishwasher is working like new again.
popped the new repair arm into the slot
Went shopping for a new dishwasher. Then I read some repair stories on your website that matched my problem exactly. I decided I had nothing to loose. Ordered the 2 parts that others had used. I screwed in the upper spray arm nut and snapped in the upper spray arm assembly. The repair was quick and sooo.. easy. I'm so glad I read the repair reviews! And to think I was about to shell out big bucks to get a new dishwasher. Your site saved me hundreds!
The repair was easy. I just pulled out the old door gasket and cleaned the area where it was and installed the new gasket by just pushing it in the door channel. This took about 10 minutes. Then I replaced the upper spray arm by taking the old plastic nut off by turning it by hand and replacing it with a new one. After doing this I just pushed the spray arm up into it till it locked in. This took about 5 minutes. All together to fix my project it took about 15 minutes. But the best part is the dishwasher does not leak any more and runs as it should. Thanks Part Select for your quality parts, great service and fast shipping.
Unscrewed the spray arm nut and installed the new one. Snapped the spray arm into the hole in the nut.
once receiving the parts, I reached into the dishwasher and unscrewed the upper spray arm nut by hand to remove it. Compared the old part to the new one before installation and found that the hole in the old one was considerably larger due to wear over many years. I then proceeded to screw the new upper spray arm nut back into place, again by hand until tight. I unpacakged the upper spray arm, snapped it into place and was finished. Simple as that. Ran the dishwasher through a rinse cycle to make sure the part did not fall off again and it did not. Thanks for the other stories on your website that helped me diagnose and repair my dishwasher. Jeff Catella
I replaced the old parts with the new ones.
unscrewed old nut, replaced it with the new nut and then inserted the upper spray arm into it.It was great, and the dishwasher works perfectly again. I also want to mention that the part was received the day after I ordered it, I could not be more pleased. Thanks I would give the highest rating to the service.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.