Quick Question!

Have you ever purchased from PartSelect.com before?

11747599-1-S-Whirlpool-WP99001326-Upper Discharge Housing Gasket
11747599-1-S-Whirlpool-WP99001326-Upper Discharge Housing Gasket 11747599-2-S-Whirlpool-WP99001326-Upper Discharge Housing Gasket http://www.partselect.com/Schematics/Maytag/53879.gif

Upper Discharge Housing Gasket

PartSelect Number PS11747599

This upper discharge housing gasket is fifteen inches long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Not cleaning dishes properly.
  • Leaking.
  • Not draining.

Compare At

$5.69

You Save

$.95

Your Price

$4.74
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 19 reviews What's this?
16-19 of 19
 

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Rick from Cedar Rapids, IA

Bottom of housing fell off of pump and rode on top of impeller

removed lower spray arm strainers and other parts to replace upper pump housing

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Glenn from DOWNERS GROVE, IL

My dishwasher sounded like an angry meat grinder

I dissected down the assembly and ran it as I moved through different parts of the assembly until I found the culprit parts. Stop and start as I went through it. I found a blown out impeller.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: Andy from Port Deposit, MD

Started to make loud noise

this repair is done from the inside,remove lower basket,screw off the center nut (its not to tight came off by hand, no tools)take off spray arm,take all the torque bolts out,remove the screen filter take the 3 bolts out of the pump housing and remove, mine came apart that was the noise. The impeller may not need to be replaced but mine had marks on it so I did.Install new seals clean up parts and put it back together with new parts ..works as good as new!!! I had my new parts in 1 (ONE)day PartSelect thank you. Andy,

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set, Wrench set
Customer: louis from norfolk, MA

Grinding noise

replaced broken part

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-19 of 19