Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747557
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I removed the 2 screws and replaced the ice guide. I removed the old water dispenser arm along with the spring and little plastic part. I put in the new arm and replaced the spring ,plastic pieceand screws and it worked like new.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed the one screw that holds the dispenser arm on one side and was able to remove the entire assembly. Had to remove the water tube from its holder. Very easy only two philips head screws hold it in place. Fitted the new arm in place while positioning the water tube in the space above the dispener arm. replaced the first screw removed that holds the dispenser assembly in place. Reattached water tube. Repair complete and working better than new!
1. removed old broken arm (w/screwdriver)2. .....gently placed 'new part' in place (of old) and one (& only one screw), tightened slightly.....and presto..... PRESSED ON NEW ARM..... ..............'WATER FLOWED'..... THANKYOU, JIM
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.