Quick Question!

Have you ever purchased from PartSelect.com before?

11747542-1-S-Whirlpool-WP98165-Screw 11747542-2-S-Whirlpool-WP98165-Screw http://www.partselect.com/Schematics/Maytag/6685.gif


PartSelect Number PS11747542

This part works with the following brands: Amana, Kenmore, Whirlpool, KitchenAid, Maytag, Jenn-Air, Litton, Menumaster, Crosley, Dacor, Hardwick, Gaggenau, Hoover, Inglis, Admiral, International, Gibson, General Electric, Magic Chef, Roper.

This part works with the following products: Refrigerator, Washer, Freezer, Air Conditioner, Dryer, Microwave, Washer Dryer Combo, Dishwasher, Ice Maker, Trash Compactor, Range, Cooktop.

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Robert from Sunnyvale, CA

Leaky ice maker - non-stick coating had failed

replaced the entire ice make - 3 screws and a squeeze -off connector and it's out. Reverse to re-install... except that the fill tube had iced up. To thaw the fill tube: unload freezer section (leave food in fridge, but keep door closed), remove ice maker. Boil water, dip drill bit (dull end) into hot water, swirl around, insert (dull end) into to fill tube. Depending on how hot you got it, maybe a tablespoon of ice will melt. Repeat many times - fill tube is about 14" long! Do not use anything sharp - you will nick the tube and ice will form causing you to repeat this procedure. Do not try to break the ice - let the heat work. It took me about 30 minutes to thaw the whole thing - it made a nive gasping noise when the final plug opened up. Re-install ice maker.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1