Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747457
Used for door handle mounting stems.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Removing the old push nuts was the most difficult task and it became necessary to pry each nut flap open a bit using a tiny slot screwdriver tip and then remove the nut from the damaged handle. This took the most time, being careful not to damage the glass front. Once the push nuts were removed, It took less than 5 minutes to reinstall the new handle, push nuts and attach the glass door with new handle with two screws through the oven door. Good as new. Oh, yes, I returned the push nuts and screws that I ordered because replacements were included with the handle. Select Parts graciously refunded that part of my order.
Help other customers find the most helpful instructions.
Were these instructions helpful?
cut 3/8" off each handle supports and used no. 10 1/2' sheet metal screws to secure handle and door front to the oven door. The supports had to be shorten to allow the door front to fit correctly on the oven door.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.