Also known as spark electrode. This part helps your burner ignite and produce flame.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9754215 replaces these:
AP6013922, 9754215
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Penny
June 4, 2019
I need a burner spark electrode and based on the model number of my range, it is suggested that the part I need is WP9754215. How easy is it to replace? There two screws to take the top burner off and once its off...does the electrode pull up and then replace the new one and then push down for a connection?
For model number KGRT607HWH6
Hi Penny,
Thank you for your question. This should not be too difficult to install. Before you begin any repair please unplug the appliance from the electrical outlet. First, remove all the burner grates and caps from the cooktop. Then remove the mounting screws securing all of the burner bases. Then insert a putty knife under the sides of the main top to release the spring clips. Lift the cooktop up and support it with a sturdy object. Use a 16 mm open ended wrench to remove the orifice holder you wish to replace. Remove the mounting screw to release the old electrode and disconnect the wire. Attach the new electrode to the wire and secure it with the screw. Follow the steps in reverse to finish. Restore power to the stove and everything should now work for you. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
William
February 28, 2018
Front left burner, 12,500 btu will click, but not light. Is (igntr-burner) the problem? Is it too hard to replace, and needs technician
For model number GLT3014G
Hi William, Thank you for the question. This sounds like an issue with the Surface Igniter, Part Number: PS731510 for the burner. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
