Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747064
This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Unscrewed wing nut by hand and remover wash arm. Seals slipped in with out force.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the end clips so I could slide out the upper rack........I recommend doing this carefully inorder to reuse the clips. All the repairs were easy..........at first I thought the lower arm was not tightened enough, but a simple search told me that it is supposed to "wobble".Thank you for making it so easy to find the right parts. You do an excellent job of organizing parts by model #.
unscrewed upper wing nut with fingers replaced the washer arm bearing ring and lower spray arm seal- (a little confused where to place the washer bearing ring since old ring was broken and had slipped down into washer arm.Your schematic showed clearly how to do it. Cost of repair was about $30. I think my local repair shop ( a reputable company ) would have been in the $200 or more range.. Thanks. The letters from other customers were a big help.
At first, I suspected the door seal was at fault. However, after reading others' repair experiences, I found the dishwasher may leak if the wash arm bearings are worn. So, I took a look at those, and indeed they were quite worn.After receiving the parts in the mail, I called my 7 and 9 year old kids over. They were excited to open the package, and weren't too disappointed when they found it was dishwasher parts. I told them it was up to them to fix the dishwasher. As I sat on a stool, I instructed them what to do. They did a great job and now it doesn't leak any more.
The wash arm parts were the most functionally important. These just snap into place. I was amused to see that the lower spray arm seal no longer even resembled the shape of the original part. My seal had worn to the shape of a thin fingering. The dish rack clips were a little more challenging. Snapping off the old ones was straightforward but figuring out the proper orientation of the new clips required a little thought. However, I like puzzles.
Simply looked at the exploded parts diagram and put it back together 1-2-3. No problem!
After nearly 2 hours of looking, Mr. Appliance finally discovered that the rubber manifold to the upper spray arm had a big hole in it. The replacement manifold is plastic, not rubber, and requires that the upper spray arm be replaced also. There are two screws holding the manifold and spray arm to the upper rack. It' will save you time if you only unscrew the bottom screw! The bearing for the lower spray arm was badly worn allowing the arm to wobble. This wobble might been the major problem related to water leak. Excessive wobble can create an unwanted wave action in the dishwater, causing water to leak under the front door. The bearing was very easy to replace. I also ordered a new pump outlet seal, but did not install it since the dishwasher works like new and doesn't leak water anymore. While checking earlier for possible leaks, the lower front panels were removed. The sound insulation on one of the panels was wet due to water leaking under the door. Reinstalling the panels, after allowing the insulation to dry, was the hardest and most time consuming part of the repair.
These parts were VERY easy to install. The dishwasher works perfectly now.
Removed broken piece of retainer nut .Removed defective parts and installed new parts...No tools required. Very easy . Parts locating and ordering very very easy. Thanks for a pleasant repair job....Total repair time Less than 5 minutes.....So easy a caveman could do it.
slid basket out removed old broken wingnut,bushing and bearing and replaced new parts! very easy.
My dishwasher was not completely draining. I took the arm that sprays the water off and felt for something that might be stopping up the drain....finding nothing, I took the seal to Home Depot to ask if this ring was broken or if the gap was supposed to be there. The "you can do it, we can help" guys didn't have the faintest idea. So I came home and looked up parts for Whirlpool dishwashers and landed on your site. Found that the wash arm bearing ring was missing on my machine (don't know where or how it got off it's intended spot...never did find it). So I ordered the missing part and fixed it myself. Did I say that I'm 77, a widow and live alone....so I was quite proud of myself. Thank you for such a helpful website for DIYers.
took off the wash arm and replaced bearing ring also replaced door seal cleaned vent and replaced door bumper at bottom and it still leaks
We watched the repair video at Parts Select and realized we were missing a seal, ordered the parts (**received the next day, we were amazed**) & my 10 yr old son repaired after watching video. THANK YOU
Found the problem, Looked at partselect.com & found both the hold down nut & the washer for the nut. Ordered both pieces & waited for their arrival. Opened both bags when parts showed up & found the nut has a flat area for the washer to rest against, That flat area was broke almost in half. I was pissed just getting a new piece from a company and seeing this. I had no option but to try & use the nut as it is. I was able to use the dishwasher again, but the nut will not stay with the correct tension on it. It catches on the arm to much & tightens its self up so then the arm will quit moving.
unscrewed hold down thumb screw pulled up washer spray assembly set in bottom seal then put spray assembly back with bearing on top of spray assembly and reattached thumb screw ,done really took about 30 seconds
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.