Quick Question!

Have you ever purchased from PartSelect.com before?

11747064-1-S-Whirlpool-WP9742946-Wash Arm Bearing Ring
11747064-1-S-Whirlpool-WP9742946-Wash Arm Bearing Ring 11747064-2-S-Whirlpool-WP9742946-Wash Arm Bearing Ring http://www.partselect.com/Schematics/Whirlpool/D42XRBPB.gif

Wash Arm Bearing Ring

Compare At

$16.75

You Save

$2.79

Your Price

$13.96
Order within the next 5 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747064
Manufacturer Part Number WP9742946
Manufactured by Whirlpool

This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Estate, Inglis, Crosley, Roper.

This part works with the following products: Dishwasher, Microwave.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Not draining.
  • Will Not Start.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 94 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: MARY from STATEN ISLAND, NY

Wash arm retainer nut snapped off

I unscrewed the remaining part of the retainer nut with my finger and then I removed the old sprayarm seal and replaced it with a new one. Next I removed the wash arm bearing ring and replaced it with a new one. Then finally I screwed in the wash arm retained nut with my fingers. I did all this within 5 mins. I saved alot of money doing it myself. My dishwasher is working great. I love kitched aid dishwashers. I have another one in my 2nd home.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Hubert from Edwardsville, IL

Broke and worn parts

Actually I had taken the dishwasher most of the way apart to clean out some pieces that had gotten to the pump impellor and were making noises when draining. While doing this I found the flange on the wash arm bearing ring was totally wore away.
The clips on the tinerow clip had been broke for a while so I went ahead and replaced them too. Both parts were easy to replace requiring no tools.
One thing I should mention is that the replacement tinerow clips were gray instead of white.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: fred from york, PA

Dishes not clean, water leaking from front of dishwasher

most everything snapped easly into place only one screw to deal with. very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Billy M from Blountsville, AL

Lower wash arm seals were worn out.

Unscrewed wing nut by hand and remover wash arm. Seals slipped in with out force.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Deborah from New Paltz, NY

Water was not dispersing properly which left dishes less than clean

I removed the end clips so I could slide out the upper rack........I recommend doing this carefully inorder to reuse the clips. All the repairs were easy..........at first I thought the lower arm was not tightened enough, but a simple search told me that it is supposed to "wobble".
Thank you for making it so easy to find the right parts. You do an excellent job of organizing parts by model #.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Bernard from Princeton, NJ

Wobble in lower arm-dishwasher not cleaning

unscrewed upper wing nut with fingers replaced the washer arm bearing ring and lower spray arm seal- (a little confused where to place the washer bearing ring since old ring was broken and had slipped down into washer arm.Your schematic showed clearly how to do it. Cost of repair was about $30. I think my local repair shop ( a reputable company ) would have been in the $200 or more range.. Thanks. The letters from other customers were a big help.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Julian from Norton, MA

Replacement of worn or broken parts

The wash arm parts were the most functionally important. These just snap into place. I was amused to see that the lower spray arm seal no longer even resembled the shape of the original part. My seal had worn to the shape of a thin fingering. The dish rack clips were a little more challenging. Snapping off the old ones was straightforward but figuring out the proper orientation of the new clips required a little thought. However, I like puzzles.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Alan from Freehold, NJ

Lower dish sprayer came off, retainer nut broke.

Simply looked at the exploded parts diagram and put it back together 1-2-3. No problem!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Arthur from Whispering Pines, NC

Water leaking out bottom of dishwasher dooe

After nearly 2 hours of looking, Mr. Appliance finally discovered that the rubber manifold to the upper spray arm had a big hole in it. The replacement manifold is plastic, not rubber, and requires that the upper spray arm be replaced also. There are two screws holding the manifold and spray arm to the upper rack. It' will save you time if you only unscrew the bottom screw! The bearing for the lower spray arm was badly worn allowing the arm to wobble. This wobble might been the major problem related to water leak. Excessive wobble can create an unwanted wave action in the dishwater, causing water to leak under the front door. The bearing was very easy to replace. I also ordered a new pump outlet seal, but did not install it since the dishwasher works like new and doesn't leak water anymore. While checking earlier for possible leaks, the lower front panels were removed. The sound insulation on one of the panels was wet due to water leaking under the door. Reinstalling the panels, after allowing the insulation to dry, was the hardest and most time consuming part of the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Luis from Coral Gables, FL

The dishwasher was leaking

These parts were VERY easy to install. The dishwasher works perfectly now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Joseph from Oakdale, PA

Broken retainer nut and worn spray arm bearing ring

Removed broken piece of retainer nut .Removed defective parts and installed new parts...No tools required. Very easy . Parts locating and ordering very very easy. Thanks for a pleasant repair job....Total repair time Less than 5 minutes.....So easy a caveman could do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Wrench (Adjustable)
Customer: yancey from calhoun, GA

Washers,bearing and wing nut replaced

slid basket out removed old broken wingnut,bushing and bearing and replaced new parts! very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Wash Arm Bearing Ring
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Marie from Plano, TX

Dishwaster would not completely drain

My dishwasher was not completely draining. I took the arm that sprays the water off and felt for something that might be stopping up the drain....finding nothing, I took the seal to Home Depot to ask if this ring was broken or if the gap was supposed to be there. The "you can do it, we can help" guys didn't have the faintest idea. So I came home and looked up parts for Whirlpool dishwashers and landed on your site. Found that the wash arm bearing ring was missing on my machine (don't know where or how it got off it's intended spot...never did find it). So I ordered the missing part and fixed it myself. Did I say that I'm 77, a widow and live alone....so I was quite proud of myself. Thank you for such a helpful website for DIYers.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Wash Arm Bearing Ring
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: carl from danville, AL

Leaks out the door

took off the wash arm and replaced bearing ring also replaced door seal cleaned vent and replaced door bumper at bottom and it still leaks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Connie from Bell, FL

Dishes were not getting cleaned - found missing seal

We watched the repair video at Parts Select and realized we were missing a seal, ordered the parts (**received the next day, we were amazed**) & my 10 yr old son repaired after watching video. THANK YOU

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11747064
Manufacturer Part Number: WP9742946
Brand Model Number Description
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66513402K900Dishwasher
Kenmore66513402K901Dishwasher
Kenmore66513409K900Dishwasher
Kenmore66513409K901Dishwasher
Kenmore66513442K900Dishwasher
Kenmore66513442K901Dishwasher
Kenmore66513443K900Dishwasher
Kenmore66513443K901Dishwasher
Kenmore66513444K900Dishwasher
Kenmore66513444K901Dishwasher
Kenmore66513449K900Dishwasher
Kenmore66513449K901Dishwasher
Kenmore66513492K600Dishwasher
Kenmore66513499K600Dishwasher
Kenmore66513592K600Dishwasher
Kenmore66513593K600Dishwasher
Kenmore66513594K600Dishwasher
Kenmore66513599K600Dishwasher
Kenmore66513692K600Dishwasher
Kenmore66513699K600Dishwasher
Kenmore66515622000Dishwasher
Kenmore66515624000Dishwasher
Kenmore66515627000Dishwasher
Kenmore66515629000Dishwasher