Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747063
Use this part to secure the lower spray arm of your dishwasher.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I put the bearing ring on the washer arm and then screwed on the retainer nut.Easy to order the needed parts
Help other customers find the most helpful instructions.
Were these instructions helpful?
I just had to unscrew the old nut and screw the new one and install the new wash arm bearing ring.
piece of cake to do, follow instructions on sheet provided easy as 1,2,3...
It was a quick repair. One screw and easy install on other parts.
I unscrewed the remaining part of the retainer nut with my finger and then I removed the old sprayarm seal and replaced it with a new one. Next I removed the wash arm bearing ring and replaced it with a new one. Then finally I screwed in the wash arm retained nut with my fingers. I did all this within 5 mins. I saved alot of money doing it myself. My dishwasher is working great. I love kitched aid dishwashers. I have another one in my 2nd home.
most everything snapped easly into place only one screw to deal with. very easy repair.
At first, I suspected the door seal was at fault. However, after reading others' repair experiences, I found the dishwasher may leak if the wash arm bearings are worn. So, I took a look at those, and indeed they were quite worn.After receiving the parts in the mail, I called my 7 and 9 year old kids over. They were excited to open the package, and weren't too disappointed when they found it was dishwasher parts. I told them it was up to them to fix the dishwasher. As I sat on a stool, I instructed them what to do. They did a great job and now it doesn't leak any more.
I decided to remove the lower wash arm to see if I had a missing screw (which had been the reason my dishes on the top rack weren't coming clean earlier in the year), and there was the problem...the retainer nut was worn out and the top was almost competely separated from the base. I had to use needle nose pliers to remove the retainer nut since it was almost in two pieces, but replacing it (once I had the part) was really easy. My favorite kind of repair, quick, effective and inexpensive!
I found the part in about 5 minutes off the website, ordered it, and it was delviered in less than 3 days. The repair took one minute.Very helpful site, and I would use it everytime.
Removed broken piece of retainer nut .Removed defective parts and installed new parts...No tools required. Very easy . Parts locating and ordering very very easy. Thanks for a pleasant repair job....Total repair time Less than 5 minutes.....So easy a caveman could do it.
slid basket out removed old broken wingnut,bushing and bearing and replaced new parts! very easy.
Take the old one out screw the new one In
prompt delivery - very please. Easy to repair - video was very helpful.Thank you
As per the machine diagram shown on PartSelect's site, we reassembled the wash arm. It was about as difficult as screwing in a light bulb! This part has broken in the past, and we'd called a repair service to check it out, which cost us $65! This time we paid $11 (including shipping!) got the part in less that 3 days, didn't have to wait around for the repair guy, and our dishwasher is back in business!
Found the problem, Looked at partselect.com & found both the hold down nut & the washer for the nut. Ordered both pieces & waited for their arrival. Opened both bags when parts showed up & found the nut has a flat area for the washer to rest against, That flat area was broke almost in half. I was pissed just getting a new piece from a company and seeing this. I had no option but to try & use the nut as it is. I was able to use the dishwasher again, but the nut will not stay with the correct tension on it. It catches on the arm to much & tightens its self up so then the arm will quit moving.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.