Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Christine
January 31, 2018
I need to replace the lever knob but do not need the long silver part that shows in the picture. Can I just get the knob, or can I use the knob only if I order this part? Thanks for your response!
For model number KSM75WH
Hi Christine, Thank you for the question. Once the knob is removed from the lever it will not stay in place. We suggest replacing the knob and lever together. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
December 13, 2019
Can you help.Fix the latch release for the tilt head?
For model number Kenmore 417602
Hi Bil, thank you for your question. Unfortunately we do not have a video for the part specifically however we have a video showing how to get to the worm gear. Which has all of the first steps that you will need to actually get to the lever. You can view that here: https://youtu.be/tb6oDVhm5ak. Once you open up your machine you will clearly see a screw that is holding in the lever. You just remove that to replace the part and you are good to go. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chuck
May 6, 2019
Is there a video showing what must i remove to change the lock/ lever on the mixer?
For model number K45SS
Hi Chuck, thank you for your question. Unfortunately we do not however we have a video showing how to get to the worm gear. Which has all of the first steps that you will need to actually get to the lever. You can view that here: https://youtu.be/tb6oDVhm5ak. Once you open up your machine you will clearly see a screw that is holding in the lever. You just remove that to replace the part and you are good to go. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.