Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746949
Used with Stand Mixers.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
cant be any more easy honestly the hardest part is taking the wires off the old board, mine were on there very well so I used a pair of needle nose pliers to remove them CARFULLY ! other than that this repair is.. the silver "beauty ring" has a screw on the back of the mixer remove, then there are four screws around the top cover plate remove, then the 2 screws that hold down the speed control remove. STOP ! make sure to lable each wire BEFORE removing from the old speed control !! POOF then put on the new one and put your mixer back togather your done.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Unplugged unit. Took top housing off of mixer (half dozen small screws). Disconnected speed control circuit card from five wiring connections. Removed card from mixer chassis (two screws). When new part came (the next day) I reversed the procedure in about 5 minutes and had a working mixer! Thanks.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.