Quick Question!

Have you ever purchased from PartSelect.com before?

11746942-1-S-Whirlpool-WP9706529-Worm Gear
11746942-1-S-Whirlpool-WP9706529-Worm Gear 11746942-2-S-Whirlpool-WP9706529-Worm Gear http://www.partselect.com/Schematics/Whirlpool/0XW0IVKY.gif

Worm Gear

PartSelect Number PS11746942

Used in Stand Mixers.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$11.03

You Save

$1.84

Your Price

$9.19
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 22 reviews What's this?
16-22 of 22
 

2 of 3 people found this instruction helpful

Parts Used:
  • Worm Gear
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Joseph from Mentone, CA

None

followed directions given, removed all the old grease .did a short test run , then replaced with new grease. the reason the gear was striped was my fault mixing too much bread at one time. we have a coffee house and use the mixer every day.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Marcelline from PENFIELD, NY

The front gear was worn

I took all the grease out of the top of the mixer. Saw that the gear was worn. When the new parts came I put as much grease in as was in before. Put it back together and it worked like a champ.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 7 people found this instruction helpful

Parts Used:
  • Worm Gear
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Jamie from Jamestown, ND

Gear teeth worn off worm gear

replace worm gear

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Worm Gear
Level of Difficulty: Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Stuart from Pittsford, NY

Gear stripped was trying to replace

Could not get it properly installed. Had to take to a repair center for completion.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 17 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Wrench (Adjustable)
Customer: barbara from hancock, WI

Gears broke

remov5 screws then snap ring thenn 4 screws then reploace with new parts and put back together

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Linda from Ivanhoe, VA

Needed repair

The worm gear was defective. Called the 888 number and received excellent service. Said I would receive a refund and a new one in the mail.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Worm Gear
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Kenneth from Brookings, OR

Mixer beater quite

disassembled unit gear head and replaced broken part, then reassembled

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-22 of 22