Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746935
This roll pin is less than an inch long and is made of metal.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Fried the new circuit board, dead short somewhere.
Help other customers find the most helpful instructions.
Were these instructions helpful?
This is an easy repair and doesn't take hardly any time, once you can identify the electrical bridals to disconnect and the position of the new ice chute door interface point with the solenoid.The supplied directions are complete but were quite a bit blurry. The more general dissasembly which is effectively 5 screws and two electrical bridals to remove/disconnect is straight forward. Pay particular attention to the mounting point of the ice door interface with the solenoid. I did it twice because I didn't align the door properly the first time:-) Much too easy a job than to "call the guy."
i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .
The repair did not work. The new door strike did not embrace the solenoid.I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin. Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.
Easy to install and it works fine. Recommend using the instruction manual and it was a breeze
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.