Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Whirlpool/H4LIAIK0.gif
See part 4 in the diagram
http://www.partselect.com/Schematics/Whirlpool/H4LIAIK0.gif

Seal

PartSelect Number PS11746920

Used in Blenders.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$6.18

You Save

$1.03

Your Price

$5.15
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 7 reviews What's this?
1-7 of 7
 

26 of 39 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Doug from Vancover, WA

Jar had a chip that caused it to leak

No tools required, just unscrew the old jar and seal and twist on the new one. Very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 14 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: David from Roselle, NJ

Rubber coupling came apart

I used a flat screw driver and gently and forcibly removed the part as recommended in the instructional manual. Putting the replacement part was not at all difficult. With the new part in place the blender now works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Seal
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: deborah from murrieta, CA

Blender missing the seal

I removed the bottom part of the blender and added the seal to the blade area, screwed it back on and voila! I appreciate that it was so easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Carolyn from Downers Grove, IL

Broken coupling and worn-out seal on a blender

To start with the coupling, I followed the directions by using a flat screwdriver and a thick towel. I placed the towel under the screwdriver to protect the base unit from damage as I pivoted 1/2 of the tip under the coupling, pulling it up as I went around until the coupling popped off. Then I cleaned the remainder of any metal left behind. Then I attempted to screw the coupling on clockwise but the screw opening was slightly to small. So I plugged in the unit and held the coupling with the screwdriver in place and turn the unit on stir and it screwed it on clockwise.
Next, the seal was replaced at the bottom of the jar. And I was finished. Easy as pie.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: louis from astoria, NY

Changed the drive coupling

I took off the worn piece. Screwed on the new one. I would have liked and would have paid for, a fitted tool to the drive shaft; which would have made the repair far easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: jerry from washington, NC

Coupling and seal wore out

followed instruction, prying off old coupling and screwed new coupling on less than 5 minutes. Parts came in a timely manner. great service, satisfied customer

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jeffrey from Middletown, CT

Rubber coupling had broken teeth...

I followed the included instructions.

Removal of the old coupling was easily done by gently prying it up. The threads on ot are much softer that the shaft.

Screwed the new coupling on and done.

I also bought two of these couplings as the rubber on it WILL break off again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7