Quick Question!

Have you ever purchased from PartSelect.com before?

11746901-1-S-Whirlpool-WP9703241-Lid Seal
11746901-1-S-Whirlpool-WP9703241-Lid Seal 11746901-2-S-Whirlpool-WP9703241-Lid Seal http://www.partselect.com/Schematics/Whirlpool/DTXPXSPN.gif

Lid Seal

PartSelect Number PS11746901

Used on Blenders.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$12.30

You Save

$2.05

Your Price

$10.25
Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

24 of 26 people found this instruction helpful

Parts Used:
  • Lid Seal
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Eulyess from Grand Prairie, TX

Worn out lid seal on blender

I only had to use my hands to install the the new lid seal and the new lid seal fit perfectly. The old original seal was made of foam & would not come clean. The new lid seal is rubber; that's what the blender should have come with when new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 18 people found this instruction helpful

Parts Used:
  • Lid Seal
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ken from Kent, WA

Blender jar leaks due to worn gasket

I retrieved the package from under the doormat where the FedEx driver had left it. Using a utility knife, I carefully cut open the package but accidentally cut into the included packing slip. I removed the seal from the outer packaging and using the same knife carefully cut open the plastic bag containing the seal, being careful not to cut the seal itself. I removed the seal from the packet and removed the lid from the blender jar by turning it a few degrees counterclockwise by hand. Using my fingers, I removed the old seal from the lid and then using those same fingers I laid the new seal in place. Then slapping myself in the forehead, I realized I should probably wash the new seal before using it because you just never know who has handled it. So I reversed the installation process and after washing the seal with mild soap and water, I re-installed it on the lid using the same finger process. The next step was to re-install the lid on the jar by turning it a few degrees clockwise until it locked into place. The last step was to congratulate myself for a job well done by cracking open a beer while at the same time cursing myself for spending $16 on a stupid rubber seal.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2