Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746894
Found on the water inlet valve.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This was an easy repair. 1st I removed both water hoses2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve.3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose.4th I removed 2 hex head screws that held the water valve to the backing plate.-----------that was a whole 5 - 10 minutes!------------Next I reversed the process4th I attached the inlet valve with the 2 hex head screws5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp.6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw.7th re-attached the hot & cold lines................................DONE 15 minutes tops
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.