Quick Question!

Have you ever purchased from PartSelect.com before?

11746875-1-S-Whirlpool-WP944224-Kickplate Support Clip
11746875-1-S-Whirlpool-WP944224-Kickplate Support Clip 11746875-2-S-Whirlpool-WP944224-Kickplate Support Clip 11746875-3-S-Whirlpool-WP944224-Kickplate Support Clip http://www.partselect.com/Schematics/Whirlpool/WEYPOY71.gif

Kickplate Support Clip

PartSelect Number PS11746875

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$9.12

You Save

$1.52

Your Price

$7.60
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 3 people found this instruction helpful

Parts Used:
  • Kickplate Support Clip
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Edward from Mequon, WI

Kickplate support clips failed

Replacing the support clips was simple. But since the replacements were the same as the ones that had failed, I modified them by epoxying metal strips on each side of the fingers which had failed. Without this mod I think they would have failed very shortly like the original ones did. This added a half hour to the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Kickplate Support Clip
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: William from Fountain Valley, CA

Broken kickplate support clip (left side)

Unscrewed old broken part from the kickplate and attempted to install the new clip. Mounting screws would not go into the new clip. Had to drill out the mounting holes in the plastic clip using a #30 drill bit. Once the new clip was mounted, attempted to snap the kickplate back in place. Unfortunately at the left side the kickplate would not fully mate with the metal clip on the refrigerator body and would not snap all the way back to the refrigerator front surface, as the right side does. At least the kickplate doesn't fall down onto the floor on the left side as it did before. I suspect there is an alignment problem with the left side refrigerator metal clip, but have not pursued that yet.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2