Quick Question!

Have you ever purchased from PartSelect.com before?

11746833-1-S-Whirlpool-WP903079-Upper Spray Arm Assembly
11746833-1-S-Whirlpool-WP903079-Upper Spray Arm Assembly 11746833-2-S-Whirlpool-WP903079-Upper Spray Arm Assembly 11746833-3-S-Whirlpool-WP903079-Upper Spray Arm Assembly http://www.partselect.com/Schematics/Maytag/37517.gif

Upper Spray Arm Assembly

PartSelect Number PS11746833

This upper spray arm assembly is nineteen and a half inches long. It is beige in color and is made of plastic.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.

Compare At

$28.92

You Save

$4.82

Your Price

$24.10
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

31 of 38 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Timothy from Salt Lake City, UT

Spray holes clogged by hard water deposits

I took off old upper spray arm by gently prying it and the retainer off the upper section of the dishwasher. When I first did this, two prongs of the original retainer clip broke off so I had to order a new retainer clip. The new arm fit perfectly in place and was easily held in place by the new retainer clip. This is a very simple and easy repair. The only tool I used was a flat headed screwdriver to pry off the old arm, but one could probably pry it off manually also.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Nancy from Midlothian, IL

Dishwasher not cleaning dishes

Lower Dishrack assembly just rolled into the dishwasher-easy, easy, easy!
The Upper Spray Arm assembly- broke off tab to old arm using a screwdriver to pry off the tab. Pushed the new arm assembly and tab into place. The only problem was not to bend the prongs on the plastic tab (they bend back easily if you do happen to bend them, though)
My dishwasher cleans like new!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jim from Corpus Christi, TX

Old spray arm was plugged up with build up.

Pull straight down to remove upper arm. Hold new arm in place and push the locking retainer into the center hole in the arm and locking it into the holder. Very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: NICKIE from Weaverville, NC

Upper spray arm replacement

popped out the spray arm snap retainer that held in the upper spray arm and pushed the new snap retainer into the new upper spray arm to complete the job. I thought I must have done something wrong because it only took about a minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4