Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746804
This bake element has push-on terminals.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
MAKE SURE OVEN IS OFF, MAKE SURE OVEN IS OFF DONT try to take of the small screws that hold the element in place particulary if it is older (mine was 25 years)usless you have the correct socket. Remember left to loosen and right to tight.Buy the correct size or you will buy new screws in the end.Lay newspaper over the open door before you reach in to the oven to keep from getting any soot or grease on your shirt when you are reaching into the oven. Remove trays from oven.Reach into the oven with the socket( a extension helps)and remove the screws.Gently pull the ends of the old element out of the back of the oven you will see they are connected to wires by slipon clips. Gently pry them off with a small screwdriver putting the screwdriver at the base and turning the screwdriver to pry them up. The box that the new element came in works nicely for the old element. Now is a good time to clean anything on the bottom of the oven while the element is out.Gently attach the wires on the new element slip them back into the back of the oven.Attach one screw but dont completely tighten then do the other one and tighten it.Now tighten the first one.Return trays remove newspaper get you clubs or fishing rod and go have a nice day.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Easily replace by unclipping and removing bake element and replacing it in reverse order.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.