Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746753
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. The element will kick back in when the temperature drops to 192 degrees Fahrenheit - the differential of 68 degrees.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
removed dryerplug from power source, removed dryer & vent from wall. Cleaned dryer vent. removed dryer heater and discovered the ceramic insulater brooken and heater wiring shorted to heater housing.Replaced heater. replaced cutoff-tml and high limit thermostat. checked machine control electronics assembly. The heater relay was arced and chared. Replaced the control electronic assembly.(I discovered the wiring diagram at this point). I tried to find a wiring diagram on line but, was not successful. The wire from the cutoff-tml to the high limit thermostat was wired wrong on my first attempt to repair without the wiring diagram cost me to buy a control electronics assembly.Other than that the repair was fun.
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.