Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746426
The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there could be an issue with the rinse aid cap. Check the cap and its gasket for any damage or melting. If the cap has melted or it is not sealing the dispenser properly, the part should be replaced right away. This rinse aid cap comes with the gasket, so you should discard the existing gasket and rinse aid cap at the same time. The repair is relatively straightforward, and requires no tools.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Opened door and installed cap. Not much effort. But really got good service from Parts Select. Received order much faster than I had expected.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Sears could not supply us with the replacement cap for the dishwasher. We were saved by being able to get the cap here on your web page.Your web sight is like going into the garage and finding the part you saved up for many years that you knew you would need down the road.
open door, remove food from shelf, remove drawer,remove drawer, pry up and remove slides, instalation is reverse
I just placed the cap back on, it worked great, fit fine and so glad I found this part. I was thinking of ways to McGyver it, thinking it would be impossible to find a new part. Glad i fount this site and the part.
Simply made sure the cap was securely in place.
Simply put the items in place...was very please with the parts. They were excactly as advertised and fit perfectly. The delivery was also very timely...thank you very much.
After de-installing the old ice-maker, I noticed that the rotating commutator was broken. Therefore, the electrical rotor was not making contact.The old "working" ice maker plus" system was easily adaptable to the new ice maker unit.The new replacement box came with plenty of spare cable adapters for multiple ice maker settings.
Screwed in new cap
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.