Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11746245
**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Unscrewed the old stem from the water spinner. Unscrewed and removed the old mount from the upper rack. Snapped in the new mount...no screw necessary with the new piece. Screwed the stem to the water spinner...as good as new. EASY!
Help other customers find the most helpful instructions.
Were these instructions helpful?
simply applied the parts by looking at the old parts on the machine. Very simple
Un screwed the bracket part fron the arm, screwed the new part to the arm and snapped in onto the wire tray. snappo...done.
Replaced mount and spray arm by unscrewing thebroken mount, inserting the replacement mount,attaching the spray arm and aligning it with thewater supply.
Once the new parts came in I simply changed out part for part. It was very simple to do the parts where just like the originals that where in the dishwasher.
It took longer to open the package than it did to install the new piece. All I had to do was unscrew one screw, snap the new piece on and screw in one screw.
Removed one screw and replaced with new part and screw.
I had already taken the broken mount, which holds the top spinning in place off. Just had to undo the screw, reassemble, and clip in place. Fortunately I had seen a similar story that identified that the type of clip had been modified, and the new installation required one less screw, as it clipped in place instead. The hardest part was getting the old part out, because there wasn't anything to brace it easily. Communication from Part Select was great, and delivery was quick!
The repair was so simple, I removed the broken bracket with a phillips screwdriver. Took off the piece that connects to the back of the dishwasher when closed and replaced the plastic bracket. Screwed in the new bracket. 5 Min. tops! Ordering the parts took longer. Thanks for such a great online catalog!
Decided to do the repair myself, if I could get parts. Went to purchase them loacally and was told I would have to order parts, seems supply house was confused about what I needed. Found Parts Select.com on line, easy to order parts, parts came in as shown and detailed on website - installation was a breeze.Will deffinately use Parts Select.com again!Robb Jackson
I removed the old mount with a screwdriver, clipped on the new mount - no screws required - and screwd the sprayer back onto the mount. 2 mins. start to finish.
I found the model number and went to your site when it came up. I put in the model # and the photos described each part. That was very helpful. I only ordered what I needed and it arrived in one week...we did have a holiday. The part snapped on to the upper rack and I screwed the blade back in place. I'm glad I purchased another part for future breakage. If dishes or etc. catch the fan blade on top...then breakage can occur. The part was less then $5.00. What a deal!
Took off broken arm bracket and replaced with new bracket. Was really impressed with the web site for helping to find the right part and was very satisfied with the speedy delivery. I would definitely use this site again!!
Got in the new mount, attached it to the top basket, and screwed it to the arm. Worked like a champ.
I removed the old parts and installed the new in the same manner. Quite easy. The spray arm kit had a part that I didn't see where it went (because the old part was gone), but I figured it out.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.