Quick Question!

Have you ever purchased from PartSelect.com before?

11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount
11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-2-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-3-S-Whirlpool-WP8539324-Upper Spray Arm Mount http://www.partselect.com/Schematics/Whirlpool/I3UBBVVU.gif

Upper Spray Arm Mount

Compare At

$7.73

You Save

$1.29

Your Price

$6.44
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11746245
Manufacturer Part Number WP8539324
Manufactured by Whirlpool

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

This part works with the following brands: Kenmore, KitchenAid, Whirlpool, Inglis.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Door won’t close.
  • Will not fill with water.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 98 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: ilham from north haledon, NJ

The upperspray arm mounting bracket broke

all i did is to remove the screws out take out the damaged ones and replace them the new ones put the screws back, it was very easy, it save me time and money. Thank-you part select.com

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Lon from Joliet, IL

The upper spray arm mounying bracket broke

I used a nut driver to remove the broken part. I should have marked the original position of the part beore I removed it. I then needed a square drive screwdriver to complete the disassembly. A little trial & error and I found the correct location to do the remount.

I also tried to replace one of the rack rollers, but ordered the wrong part. The photos online weren't quite enough for an easy ID of the correct part. I needed a roller with a right angle mount.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Randall from Santa Rosa Beach, FL

Top spray unit broke off

Received unit in two or three days even during Christmas rush.
Replaced sprayer with just a screwdriver in no time and dishwasher is working perfectly.
PartSelect is the only way to go. I have used them for other parts and they are always prompt and easy to identify parts on their website.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Pia from Pleasanton, CA

Upper water spray arm broke off

My husband put too many things in the dishwasher and it interfered with the upper spray arm. The piece that fastens the upper arm to the top basket broke. Bummer....I run the darn thing at least once a day.

I ordered the part (super easy to do) and it was here the next day. (I only had to do one load by hand). I used a screwdriver to detach the arm, replaced the piece and screwed the new one in place. Five minutes-done.

My husband was impressed. Duh!
:-)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Susan from cooper city, FL

Plastic piece on spray arm broke

a mater of unscrewing the part attached to the upper drawer...........placing new pieces together and srewing them on...............schematic on your web site was perfect.......had pieces sent over night.........wonderful experience

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: mark from Sumter, SC

Part was broken

Extremely easy. Put part in the upper basket of the diswasher and hooked up the spay arm. If you know how it came off, you should know how it went back on, is the motto. The part fit perfectly and this website did a great job of pictures for comparison.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: William from Indianapolis, IN

Upper spray arm broken off

Removed one screw holding remainder of the upper spray arm bracket from the top basket. Removed one screw from the underneath side of the spray arm holding it to the Wash Arm Tube Holder. Attached the new Wash Arm Tube Holder to the spray arm, then the whole assembly to the top basket.

PartSelect was GREAT. The pictures on the web site made it easy to determine which part was needed. I ordered around 5pm and chose standard 3-day shipping, but to my surprise the parts showed up at 10:30 am the next day! I'll be back!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Tom from Plano, TX

Spray arm was broken

Went to parts select online, put in my washer info, the parts pulled right up complete with illustrated parts and it was very easy to order. The parts were actually at my door the next day, that was amazing. I think this is a very good source to get appliance parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Todd from Dublin, CA

Spray arm was loose and the mounting bracket was broken

Put the arm in place, secured with one nut, then underneath with a screw. I attached the little loop that holds the funnel part on and was done. The dishes in the upper rack have never been cleaner.

This web site is the easiest web site I've ever navigated.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mark from Amherst, MA

The upper spray arm had a large hole and would not clean upper self contents

After watching the excellent video on the PartSelect web site, the total repair using the Middle Spray Arm Kit and the Upper Spray Arm Mount took approximately 10 minutes to complete the repair. Also the delivery from PartSelect was fast (2 days).

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Robert from Deltona, FL

The upper spray spray arm mount broke

I watched the video, which was very clear, and put the new part on in minutes. It was very helpful

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Tim from Lake Geneva, WI

Sprayer mount shaft broke.

First of all it was Easter Dinner and the mount borke. Ughhh... I driled some holes and inserted wire to give it the McGiver effect to get me by. Even the mother in law was impressed! Once new parts arrived I only needed a screwdriver. Be carfeul when screwing in the new screw to hold the new sparyer to the new mount. GO SLOW..Let the plastic "give" as you tighten the screw. To fast and you could twist the new monting shaft off. And just barely snug up the screw. Being to tight, the hot water may expand the plastic durring cylcles and cause undo stress.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Deborah from New Paltz, NY

Water was not dispersing properly which left dishes less than clean

I removed the end clips so I could slide out the upper rack........I recommend doing this carefully inorder to reuse the clips. All the repairs were easy..........at first I thought the lower arm was not tightened enough, but a simple search told me that it is supposed to "wobble".
Thank you for making it so easy to find the right parts. You do an excellent job of organizing parts by model #.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Susan from Rose Valley, PA

Upper rack spray arm broke

Removed the screw from the old mount, installed the new mount and hung the arm. Could not have been a simpler process! Also really appreciated the ease of finding the part I needed o the website, and the info that told me I didn't have to order a new hanging ring by stating that it's supposed to have an opening at the 3:00 position.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: ITS from Carlstadt, NJ

Water can't go to upper rack.

first I removed the Bracket screw underneath of the upper rack , after that I removed the Bracket with my hand by bushing it downward (it removed complete assembly "Bracket & Spray Arm kit") the I removed the other screw to remove the Bracket completely, then I installed the new part's by reversing all above steps, finally I installed the Two screws back again.
It is so easy!!!!!!!!!!!!!!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11746245
Manufacturer Part Number: WP8539324
Brand Model Number Description
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66515622000Dishwasher
Kenmore66515624000Dishwasher
Kenmore66515627000Dishwasher
Kenmore66515629000Dishwasher
Kenmore66515632000Dishwasher
Kenmore66515634000Dishwasher
Kenmore66515637000Dishwasher
Kenmore66515639000Dishwasher
Kenmore66515652000Dishwasher
Kenmore66515654000Dishwasher
Kenmore66515659000Dishwasher
Kenmore66515682000Dishwasher
Kenmore66515684000Dishwasher
Kenmore66515689000Dishwasher
Kenmore66515701890Dishwasher
Kenmore66515701891Dishwasher
Kenmore66515701892Dishwasher
Kenmore66515702990Dishwasher
Kenmore66515705890Dishwasher
Kenmore66515705891Dishwasher
Kenmore66515705892Dishwasher
Kenmore66515707990Dishwasher
Kenmore66515708890Dishwasher
Kenmore66515708891Dishwasher