Quick Question!

Have you ever purchased from PartSelect.com before?

11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount
11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-2-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-3-S-Whirlpool-WP8539324-Upper Spray Arm Mount http://www.partselect.com/Schematics/Whirlpool/I3UBBVVU.gif

Upper Spray Arm Mount

PartSelect Number PS11746245

Manufacturer Part Number WP8539324
Manufactured by Whirlpool

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Will not fill with water.
  • Door won’t close.

Compare At

$7.73

You Save

$1.29

Your Price

$6.44
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 91 reviews What's this?
 

3 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Tom from Plano, TX

Spray arm was broken

Went to parts select online, put in my washer info, the parts pulled right up complete with illustrated parts and it was very easy to order. The parts were actually at my door the next day, that was amazing. I think this is a very good source to get appliance parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Todd from Dublin, CA

Spray arm was loose and the mounting bracket was broken

Put the arm in place, secured with one nut, then underneath with a screw. I attached the little loop that holds the funnel part on and was done. The dishes in the upper rack have never been cleaner.

This web site is the easiest web site I've ever navigated.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mark from Amherst, MA

The upper spray arm had a large hole and would not clean upper self contents

After watching the excellent video on the PartSelect web site, the total repair using the Middle Spray Arm Kit and the Upper Spray Arm Mount took approximately 10 minutes to complete the repair. Also the delivery from PartSelect was fast (2 days).

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Robert from Deltona, FL

The upper spray spray arm mount broke

I watched the video, which was very clear, and put the new part on in minutes. It was very helpful

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Tim from Lake Geneva, WI

Sprayer mount shaft broke.

First of all it was Easter Dinner and the mount borke. Ughhh... I driled some holes and inserted wire to give it the McGiver effect to get me by. Even the mother in law was impressed! Once new parts arrived I only needed a screwdriver. Be carfeul when screwing in the new screw to hold the new sparyer to the new mount. GO SLOW..Let the plastic "give" as you tighten the screw. To fast and you could twist the new monting shaft off. And just barely snug up the screw. Being to tight, the hot water may expand the plastic durring cylcles and cause undo stress.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Deborah from New Paltz, NY

Water was not dispersing properly which left dishes less than clean

I removed the end clips so I could slide out the upper rack........I recommend doing this carefully inorder to reuse the clips. All the repairs were easy..........at first I thought the lower arm was not tightened enough, but a simple search told me that it is supposed to "wobble".
Thank you for making it so easy to find the right parts. You do an excellent job of organizing parts by model #.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Susan from Rose Valley, PA

Upper rack spray arm broke

Removed the screw from the old mount, installed the new mount and hung the arm. Could not have been a simpler process! Also really appreciated the ease of finding the part I needed o the website, and the info that told me I didn't have to order a new hanging ring by stating that it's supposed to have an opening at the 3:00 position.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: ITS from Carlstadt, NJ

Water can't go to upper rack.

first I removed the Bracket screw underneath of the upper rack , after that I removed the Bracket with my hand by bushing it downward (it removed complete assembly "Bracket & Spray Arm kit") the I removed the other screw to remove the Bracket completely, then I installed the new part's by reversing all above steps, finally I installed the Two screws back again.
It is so easy!!!!!!!!!!!!!!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dennis from Yorktown, VA

Spray arm mount broken and supply tube cracked

First, I compared the parts visually. The mount is a slightly different design. I removed the old mount/spray arm and tube by removing the single screw through the upper mount and un-clipping the rear tube mount. Next I assembled the new parts using the old spray arm as a guide. Note: Installing the new screw for the spray arm into the new mount proved very difficult and I needed to enlarge the pilot hole slightly in order to assemble. I proceeded to attach the new mount to the upper rack and installing the rear tube mount. The new design of the mount eliminated the need for the upper mount and even if I wanted to install it, it will not fit the new design. Overall, an easy repair with a couple of hiccups.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Tracy from Haskell, NJ

The mount broke off in the upperdish rack wash assembly

I took the whole upper dish rack wash assembly apart removed the piece of broken mount and replaced with a new mount. screwed everything back together and added the Water Inlet Tube Holder that I had been missing previously. That is probably what caused the mount to wear in the first place. Anyway easy fix and good as new working beautifly!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kevin from Olathe, KS

The upper wash arm fell off in my hand, I went to internet order part in 15 mins. And had it next day.

Installed mount to upper wash arm in 2 mins. and it worked perfect I wish everything was that easy !

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Melvin from Georgetown, TX

Mount was broken.

I removed the two screws that held the old mound in place and installed the new mount, which required only one of the screws I removed. Simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Parviz from Sterling, VA

Mount broken

Just snap the new part on after mounting the spray arm on the mount with the screw driver. Mount needs to be mounted in properly or the spray arm will not spin.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jim from Modesto, CA

Top spray washer axle assembly broke

I took out the screw holding the broken part, then I screwed in the new pivot/axle assemble and snapped it into the top rack. Super Easy!!! The items in the top rack get real clean now!

Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Customer: John from Crownsville, MD

Clips were broken and very easy to replace

I pulled the top tray out by unhooking the end clips. Replacing the broken clips that hold the swivel racks was a breeze The top spray arm was replaced with two screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?