Part Location Diagram of WP8539324 Whirlpool Upper Spray Arm Mount
See part 14 in the diagram
Replacing your Kenmore Dishwasher Upper Spray Arm Mount
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Upper Spray Arm Mount WP8539324

★★★★★
★★★★★
59 Reviews

Rated by 103 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 10.39
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11746245
Manufacturer Part Number WP8539324
Manufactured by Whirlpool
Product Description

Upper Spray Arm Mount Specifications

This upper spray arm mount has been redesigned by the manufacturer, so it not longer requires a clip and screw to be installed. To replace this part, first remove the rack stops from the upper dish rack and pull out the dish rack to work on it. Remove the screw holding the spray arm in place, take off the spray arm and slide out the feeding tube. Flip the rack over to remove the mounting bracket from the mount. Snap the new mount into place and replace the other parts.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Dishwasher Upper Spray Arm Mount

Replacing your Kenmore Dishwasher Upper Spray Arm Mount
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Inglis.
Part# WP8539324 replaces these:
AP6013024, 8268844, 8539324, 9742994, WP8539324VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
59 Reviews
4.6
Filter By Rating:
  • 5 Stars
    50
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    2
  • 1 Star
    4
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 103 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
No water to the upper rack, soap dish not opening properly
Replaced the middle spray arm kit and the upper spray arm mount. Also replaced worn out spring for the soap dish.
Now all areas of the dishwasher get cleaned and the soap dispenses correctly every time.
Other Parts Used:
Upper Spray Arm Mount Spring, Lid Middle Spray Arm Kit
  • Dan from NEWPORT, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm mount cracked and rinse aid cap broke
Unlatch the rail clips on upper rack slides, slide rack off the rails. Flip rack upside down, use a philip screwdriver and remove screw that holds propeller to upper spray arm mount. Remove clamp of broken spray arm mount with philip screw driver. Replace with new upper spray arm mount (different design) and no tools needed. Just snap it in place where old one was. Put propeller over the spray arm mount and reuse screw with washer to tighten. Return rack back in the dishwasher and reattach the rail clips. For the rinse aid cap, the cap broke off. I used a nose plier to remove (unscrew) the remaining piece. Replace with new rinse aid cap. Dishwasher is running normal again.
Other Parts Used:
Upper Spray Arm Mount Rinse Aid Cap
  • Jeffrey from MEXICO, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spray arm mount
Removed holding stew from old style bracket. Put arm together with new mount and installed screw. Aligned arm with upper rack and just clicked on. Ensuring spray arm spun freely and done!
  • Daniel from DANVILLE, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Well, to make a long story short. My husband isn't mechanically inclined. He tried to surprise me and do it himself.???
I went back to the web site to make sure I'd ordered the right part.?? looked at the diagram and then watched your little video.?? He had the part hooked opposite of what was shown. (The arm wouldn't rotate) So I turned it arround. While he was still??. It took me less that 5 min and the dishwasher is working Great.????
  • Jenni G from LEHI, UT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm broke
I ordered the parts. When they came I was able to repair the parts to my rack. At first I put the tube holder on backwards then when I changed it everything worked great. My mount was also broken. I ordered a new mount and I installed it. The repair saved me from buying a new dishwasher, ?????? your video was very helpful. Be sure to put the stops on the rack properly..
  • Martha from YUMA, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm mounting bracket broke
Watched repair video attached new parts and was done
Other Parts Used:
Upper Spray Arm Mount Middle Spray Arm Kit
  • Orville from NEWPORT NEWS, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm mount broke off.
Used a screwdriver to put on new piece without any trouble.
  • Elizabeth from BUCKHANNON, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken upper arm
Removed upper tray, unscrewed upper arm mount. Clipped on new mount screwed middle spray arm to mount, clipped on support mount for arm and inserted spray into hanger. Reinstalled tray and stop clips.
Other Parts Used:
Upper Spray Arm Mount Middle Spray Arm Kit
  • Willy from AURORA, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing bearing ring, lower spray arm; and insufficient water supply reaching upper spray arm.
replaced those parts... but lingering doubts about adequacy of water supply due to sediment primarily from old iron pipes, evidenced in faucet aerator. So I added a Rusco hot water sediment trap filter to the supply line leading to the dishwasher and faucet, along with a new flex supply line to the dishwasher. Water supply seems improved, and any potential sediment will be caught by the trap.The time, tools, and complexity of adding the hot water sediment filter are not covered in the above.
Other Parts Used:
Wash Arm Bearing Ring Upper Spray Arm Mount Lower Sprayarm Seal Middle Spray Arm Kit
  • William from ALLENTOWN, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm was broken by an elevated dish in the bottom rack.
I followed the illustrative that accompanied the part and bingo, it was done. The instructional video was perfect....
  • JOHN from SOMERSET, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenric
April 26, 2019
I need the upper spray arm tube and rear mount ring to my Kenmore dishwasher
For model number 66515732000
PartSelect logo
Hi Kenric, thank you for your question. I have linked the upper wash arm assembly for you down below. There is no rear mount ring so unfortunately I am not sure if you mean something for your middle spray arm or your upper arm. I have also linked your middle spray arm tube, and the manifold parts as well. Good luck with your repair.

7 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Mavis
January 27, 2020
Is part number wp8539324 the correct upper spray arm mount for my Kenmore dishwasher model number as shown above? Also, where are you located, and what would the cost of shipping to ontario, canada be? (i haven't added this mount part in my cart yet until i confirm it's the correct one. Thank you.
For model number 15801890 Kenmore Dishwasher
PartSelect logo
Hi Mavis. Our Warehouse is in Ontario so you should receive your shipment quickly and the shipping always costs $9.99 unless it is a oversized order. Part number wp8539324 is compatible with your model 15801890. Thank you for your question and good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Kenny
September 16, 2019
On diagram part #11 & #8 rubber connecting tube and support rubber ring
For model number 665.15739000
PartSelect logo
Hello Kenny, thank you for contacting us. On your model number 8 in this diagram is the Water Inlet Tube Holder, part number PS11745473. Number 11 is the Manifold, part number PS11751313. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746245
Manufacturer Part Number: WP8539324
Brand
Model Number
Description
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
66515622000
Dishwasher
Kenmore
66515624000
Dishwasher
Kenmore
66515627000
Dishwasher
Kenmore
66515629000
Dishwasher
Kenmore
66515632000
Dishwasher
Kenmore
66515634000
Dishwasher
Kenmore
66515637000
Dishwasher
Kenmore
66515639000
Dishwasher
Kenmore
66515652000
Dishwasher
Kenmore
66515654000
Dishwasher
Kenmore
66515659000
Dishwasher
Kenmore
66515682000
Dishwasher
Kenmore
66515684000
Dishwasher
Kenmore
66515689000
Dishwasher
Kenmore
66515701890
Dishwasher
Kenmore
66515701891
Dishwasher
Kenmore
66515701892
Dishwasher
Kenmore
66515702990
Dishwasher
Kenmore
66515705890
Dishwasher
Kenmore
66515705891
Dishwasher
Kenmore
66515705892
Dishwasher
Kenmore
66515707990
Dishwasher
Kenmore
66515708890
Dishwasher
Kenmore
66515708891
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service