Quick Question!

Have you ever purchased from PartSelect.com before?

11746065-1-S-Whirlpool-WP8523698-Radiant Surface Element with Limiter - 1200W
11746065-1-S-Whirlpool-WP8523698-Radiant Surface Element with Limiter - 1200W 11746065-2-S-Whirlpool-WP8523698-Radiant Surface Element with Limiter - 1200W http://www.partselect.com/Schematics/Maytag/5ECGX156.gif

Radiant Surface Element with Limiter - 1200W

PartSelect Number PS11746065

This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1

94 of 130 people found this instruction helpful

Parts Used:
  • Radiant Surface Element with Limiter - 1200W
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Gregory from Cary, NC

Hot burner light always on

Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1