Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Whirlpool/EQH50TZ7.gif
See part 21 in the diagram
http://www.partselect.com/Schematics/Whirlpool/EQH50TZ7.gif

Timer - 60 Hz

PartSelect Number PS11745791

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not shut off.

Compare At

$134.14

You Save

$22.36

Your Price

$111.78
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

9 of 11 people found this instruction helpful

Parts Used:
  • Timer - 60 Hz
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Daniel from East Patchogue, NY

Timer

The timer on the dryer wasn't allowing the machine to start and I knew it had to be replaced. I removed the back panel to access the timer. Next I removed each wire and placed the wire in the correct place. Finally, it worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Timer - 60 Hz
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: James from Waldorf, MD

Broken timer switch

First, I made sure the unit was unpluged, then I removed the rear panel to the dryer. I Then removed the 2 screws securing the switch and pulled it out. I then carefully removed 1 wire at a time in order to replace them on the correct terminal. After re-installling the switch, I replaced the cover, pluged it back in and fired it up. No problems as of yet...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 5 people found this instruction helpful

Parts Used:
  • Timer - 60 Hz
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Socket set
Customer: Arthur from calumet city, IL

My dryer would heat for 5 minutes and then stop heating I would let the dryer cool down and then it would start to heat again

Removed the front panel and took the drum out so that I could easily dry at the coils. I replaced those and hooked everthing back up.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3