Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11745473
*Part is manufactured with a split in the ring.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
The parts I ordered came in right on time and were easily replaced. Thanks.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Determined parts needed to be replaced, found your site via search engine, ordered the parts - they arrrived EXTREMELY quick, and I installed. Great experience with your organization overall.
repair was simple and easy; just make sure you install the holder in the same direction and on same upper-tray prongs to prevent having to remove them to switch around (ensures spinner works properly).
unscrewed spray arm.snapped off inlet holder.snapped on new inlet holder.screwed on new spray arm.presto. it works.
No problem. Just snapped new parts in place. My wife has been after me for 2 years to fix this. I had it looked up on the internet an ordered and paid for in 10 minutes 3 days later the parts arrived and in 10 minutes job was done.
I used a nut driver to remove the broken part. I should have marked the original position of the part beore I removed it. I then needed a square drive screwdriver to complete the disassembly. A little trial & error and I found the correct location to do the remount.I also tried to replace one of the rack rollers, but ordered the wrong part. The photos online weren't quite enough for an easy ID of the correct part. I needed a roller with a right angle mount.
Unclipped broken holder from top rack. Removed one screw from feed tube and pulled tube off. Replaced with new parts that fit perfectly.
I took the whole upper dish rack wash assembly apart removed the piece of broken mount and replaced with a new mount. screwed everything back together and added the Water Inlet Tube Holder that I had been missing previously. That is probably what caused the mount to wear in the first place. Anyway easy fix and good as new working beautifly!!
I had already removed the old parts so when the new parts arrived, I just attached the water inlet tube holder and put the nut on the top of the sprayer assembly and it was good to go!!!! I ordered the parts one day before 3:00 and they were delivered the next day!!!! Unbelievable service!!!! Thanks and I am a very satisfied customer!!!!Julie Welty
simply removed the old feed tube and the cracked holder, then replaced them with the new parts. machine works like new.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.