Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11745459
This part is located on the top dishrack with two per side. Sold individually.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
The repair was very, very easy. The only tool I used were my fingers. Took me about 2 minutes. Would have been less but I forgot to remove the broken wheel before installing the new one so I had to repeat the process. This hardest part was removing the end piece from the rail. If you look closely there is a little tab that needs to be pushed forward to remove the end piece. Once that is done it's very easy. I'm sure I saved $100 vs calling a repair person. I actually purchased 2 replacement parts in anticipation of another one breaking.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Popped off the side stay on the rack, slid the new part on the rack and snapped it into position. Replaced the side stay on teh runner. Done!
Replaced wheels easily
removed track stops, replaced wheel mount, replaced stops
The repair was easy even for an inexperienced person like me. I used a screwdriver to free the clips from the end of the tracks that keep the rack from pulling out too far. With the clips removed, I could remove the broken wheel and slide the rack out of the dishwasher. I then snapped off the old broken part and snapped on the new part--(No tools needed) I eased the wheels back into the tracks and replace the end clips.
It took me longer to get the part outta the box than to do the job
The new part snapped in without any tools, the whole process took about 2 minutes.
I popped the wheel keeper at the end of the track with a screwdriver, slid the new one on and popped the keeper back on and away we went. It took about 5 minutes.
replaced part,ice maker still not working.
The wheel mounts broke so i had to replace them. I'm the un-handiest person ever and it took about a minute to replace all four. All I had to do was take off the stops at the front of the rack and slide out the broken wheels and slide in the new ones and put the stop back on. So easy!
Removed dishrack snapped out old parts and snapped in new one. As they say a piece if cake.Mel Shebester
Removed the basket, replaced the parts, reinstalled the basked.
Ordered Tray parts, 4 tray and 4 supports on washer wall. Replaced all moving parts for upper tray, works like new.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.