This part moves water through the spray arm by rotating inside the pump.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Noisy | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid.
Part# WP8194092 replaces these:
AP6011990, 8194092
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The dishwasher started making a lot of noise during certain parts of the wash cycle.
A Kitchenaid repairman came to look at the dishwasher and found that the rotor needed to be replaced but none were in stock. The part was on backorder and the price would be $75 plus a $55 installation fee.
I went online and found the exact same part at PartSelect for $37.98 plus shipping and when it arrived, replaced the defe
... Read morective rotor easily. Now the dishwasher is whisper quiet like it was when new. I saved a little over $80 by ordering from PartSelect and replacing it myself.
Read less
Douglas from Spokane, WA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
7 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no turning on the impeller, center ring and outer ring
took the racks and plate of dishwasher out wiped out center circle where impeller and center ring fit. the center circle became blocked with food so i had to clean it.
tamara from san diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger Moore
September 1, 2017
Will this part fix the problem of the dishwasher draining all the water out. Because the problem is that it is not draining all the water out, but leaving a small amount pooled in the bottom of both drawers?
For model number KUDD01DSSS 0
Hi Roger,
Thank you for your inquiry. Yes, the pump rotor assembly fixes the issue 99% of the time. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Julie
September 21, 2023
Pump Rotor Assembly unit is clogged stuck. Top half comes out, but under blue impeller is stuck in cylinder...thoughts on removal?
For model number KUDD01DPPA 1
Hi Julie, thank you for reaching out. Based on our research, to remove this part, you may need to hold the center ring still and turn the outer ring counterclockwise, 1/8 turn, until the tabs and notches in both rings align. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
