Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Whirlpool/VIZQAC6P.gif
See part 18 in the diagram
http://www.partselect.com/Schematics/Whirlpool/VIZQAC6P.gif

Control Knob

PartSelect Number PS11744940

This knob is light gray and is used on platinum-colored models. Sold individually and accepts a D-shaped shaft.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$23.48

You Save

$3.91

Your Price

$19.57
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 11 reviews What's this?
1-11 of 11
 

62 of 73 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set, Wrench (Adjustable)
Customer: eric from Boulder, CO

Belt wheel was broken at axle. Terrible noise.

Removed the top and back of dryer with screw socket. It was quite easy. Then, I removed the broken wheel by releasing the tension spring. I replaced the wheel. The toughest part was re-threading the belt. But, even that was simple. The dryer runs smoothly and quietly again!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

76 of 143 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Donnette from Fresno, CA

Cracked burner know

If you remove knob and sleeve remains, you have to use needle nose pliers to remove. Pull straight up, don't wiggle back-and-forth too much. If you put too much pressure on glass-top, it can crack. Prying is DANGEROUS on glass-top stoves.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 30 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Theodore from Mastic Beach, NY

Broken control knob,damaged printed ckt.In control.

Removed top panel from machine(3 screws,access to rear was necessary),removed detergent dispenser to access screw for control panel,removed control knob and unfastened control panel,disconnected harness from ECU,unfastened harness from retaining clips,removed control panel&uncliped circuit board assy.from panel,transferred buttons to new ckt.board assy,reassrmbled control panel&reinstalled,routed harness,installed new knob,verified operation,reinstalled top panel&dispenser.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 21 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Susan from Glen Ellyn, IL

Plastic knob cracked off machine

It was super easy...as the knob (Part No. 18 on our Whirlpool Duet Dryer) broke off cleanly leaving the metal pin exposed....(we had been turning it with pilers in the interim) so I just popped the new knob on and we were good to go! It was really easy to do and easy to locate the necessary part on your site. I won't hesitate to use your company and website again. Thank you for making all the parts available and saving us a service call!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Tempe, AZ

The knob that controls the wash setting broke

It only took a few seconds to slide on the new knob after it arrived by UPS. The part arrived sooner than scheduled. Great service and product.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 7 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Bill from Chanute, KS

Control knob broke

I removed the old control knob by pulling it off and installed the new one. Your service was great!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Patricia from Brentwood, TN

Control knob broke - because entirely plastic, turning interior metal selection rod

Pulled off the broken knob. Fairly disgusted with Whirlpool for not bothering to put a metal / aluminum sleeve inside to avoid the exact breakage I experienced. Part Select, however, had the part, got it to me exactly in the time frame I asked for and it was the correct part. I would definitely use Prat Select for any such need.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: linval from raleigh, NC

Broken door handle

removing the old srews was a little difficult but once it was done it was much easier to replace the new product.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Renaldia from Cornelius, NC

Knob broke off

easy as pie - ordered part. arrived in a few days and popped it back on. easy as pie. great service, quick! will definitely return to buy other parts!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gail A from Cave Creek, AZ

The plastic control knob to set the washing cycle split in two

slip the knob onto the exposed axel that selects the cycles

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Control Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: richard from Coral Springs, FL

Knob interior broke

pulled old broken knob off and removed metal clasp on knob stem. Then pushed new knob on in seconds and worked fine. Of course wife was inpressed just complained about the knob color, but can't do everything perfect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-11 of 11