Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744938
This handle may appear white, but is light gray in color called Platinum.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
The repair was simple. Just take out the two screws on the broken handle and put on the new handle and put the two screws back in. Received the part in two day and repairs was done in 5 mins. Would definitely deal with this comapny again!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
The part arrived in two days! It was really easy. I removed two screws and the broken handle, and screwed on the new one. It would have taken two minutes but I needed to find a hexagonal screwdriver.
Unscrewed the handle with a phillips screwdriver. Replaced old one with new one. Time ---- 10 minutes
Removed 2 torx screws, removed broken handle, put the new handle in placed and re-installed the screws....about 2 minutes.
removed the two screws. screwed on new handle. very, very easy.
Removed the two screws that held the handle to the door locking mechanism and removed the broken handle, then screwed the new one in.
Used the two screws left on the door from the original handle, replaced the broken handle with the new handle in 1-2 minutes. Very easy replacement and hopefully the kids won't break this one too.
Took broken handle off. screwed in new handle.My husband had a special screw driver to match the screws. This way you do not strip the screws. I loved dealing with this company. I had my small order in one day. I talked to a rep. by phone, just to make sure I was doing everything right, since I am new on the computer. He was very kind. Part select actually has a phone number, with a real voice.
2 screws aut and 2 screws in
I saw that I could easily do the repair as I only needed to unscrew the other handle and replace it with the new one, but I had my handyman do it. That was good since the previous owner had apparently glued the present handle in place and he had to remove the glue. Other than that, it was easy as could be!
First I had to remove the two screws holding on the old handle. It came right off. then I just needed to screw on the new handle. Real easy!
Looked on line for part and at this web site I was easily able to locate the part that I need (they have life size pictures of the parts) and it arrived 2 days later and the rest is history, I now have a handle on my washer. It was so easy to install 2 screws that it all.
It was so easy my wife did the repair. Remove two screws holding the broken handle and replace handle with the same screws.
Since the old part was broken off,I just took the 2 screws out,put on the new handle. And put the screws back.Very simple.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.