Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744938
This handle may appear white, but is light gray in color called Platinum.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Just required removal of two screws, placing the new handle and reinstalling the two screws. Easiest repair I've ever done!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed the 2 scews and pulled the broken handle off. placed new part on and attached with the 2 screws. Very easy not to mention I received the part in just 2 days! Wow, now that is fast!
Removed the old screws with a phillips screwdriver, screwed the new part on. 1 minute tops!
First I removed the screws and removed the broken pieces. I then attached the new handle with the removed screws. Easy as 1..2..3...
Removed screws, took cracked handle off, put new handle on, and replaced screws. So simple.
So easy - i just replaced the door handle with screw driver
It took more time to find the right screwdriver bit than to do the replacement. Removed the 2 screws holding the handle. Put new handle in place. Put the 2 screws back in. Done.
very easy fix. works great and good price on parts
First you need to remove the water from the machine, a shop vac hooked to the drain line works very well. Next remove the lower front panel ( two screws at bottom corners) and unplug pump. Remove the hose clamps and remove the hoses. Remove the screw at the front of the pump assembly and pull toward you and lift up. Instal new pump in reverse order.
My 12 year old son did it in about 3 minutes. I wish I had oredered more because it is sure to break again.
Super easy replacement. 2 Screws and a regular screwdriver or a #20 torx will work.
First I removed the two screws that hold the door handle in place. I then pulled the door handle off and replaced it with the new one. As long as partselect.com is around I'll be able to keep my appliances longer.
I took off the front lower panel and the top panel. I also removed the door. I used the screwdriver to remove the first spring and then loosed the screw on the second ring that holds the bellow in place.
This was truely easy. All I needed was a flat head screw driver and it was done within five minutes.
Just removed two screws with a phillips screwdriver and screwed the new handle on. Super simple
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.