Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744702
This stainless burner knob is used in ranges and ovens. The knob allows you to adjust the heat of the surface burner on your range. This knob accepts a D-shaped shaft. If your touchpad does not respond, the knob does not rotate, gets stuck, or the gas igniter glows but does not light, changing out this part can solve your problem. No tools are needed for this easy replacement. Make sure to unplug your range from the power source before installing. Refer to the manual provided by the manufacturer for further guidance.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Very easy, just removed the old ones and the new ones just clicked on.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the old knob and replaced with a new one from the plastic package. Biggest challenge: opening the new plastic package. It if very nice to know you have many of the parts I will need over the next 20 years.
First I removed the old damaged knobs by pulling upward on the knobs. Then I replaced the damaged knobs with the new knobs being careful to align the male and female connection. After installation I tested each burner for proper operation. As a final test, I asked my wife for her opinion. We're happy!Charles & Dorothy
Popped the old one off and installed the new one.
Should have read the partselect instructions first 1.) unplugged range 2.) unscrewed (torque screws - good thing I had some) burners - one screw was corroded into the top and snapped - will require a drill to remove and replace metal screw. 3) slid electrical wire from contact 4.) unscrewed (with phillips) Burner Electrode assembly (also corroded - took some force) replaced electrode assy and reversed steps. Works perfect.
There is really nothing to replace a stove knob. What I was impressed with was the speed in which the knobs came to my house, the very next day from the day I ordered them.Thanks a ton!
Simple. I went online, found the replacement part, ordered 5 new knobs. They came within 4 days and I put them on. Easy as can be. I saved this site so I can go back to it if I ever need to. Wonderful! Thank you..
removed two screws, lifted the element, disconnected wire, removed one screw that holds electrode, replaced anf assembled
Remove old knob. Replace with new knob.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.